NMHJIE Car WiFi UHD Dash Cam 4K for Car Cameras Video s 3840*2160P 24H Parking Monitor

【Parking Monitoring】When a collision is detected, the front and rear cameras instantly activate and begin recording, monitoring the car while parked to prevent a hit-and-run. The continuous power supply is required for 24-hour parking monitoring through a hardwire kit (optional). Within 30 seconds of detecting a collision or ion, the camera will immediately turn on and begin recording a lock-in video.【r Night Vision】The dash camera utilize excellent high-performance and WDR technology enhancements to enable the camera to operate in low-light conditions at night. With an aperture of F / 1.8, six gla es carefully tring exposure, and a 170-degree ul-wide-angle , the camera provides a wide direction and dynamic range to ensure the final image's sharpne and night image quality.

【Wide Dynamic Range (WDR)】

WDR technology can achieve very perfect video and image quality, regardle of whether the outside light is too bright or too dark.

【G-r】When the camera's built-in G r detects a violent shake or collision, the current video is locked to ensure that critical footage is recorded and that the locked video is protected from g overwritten as evidence of an emergency.

【Loop Recording】When storage becomes full; Loop Recording automatically overwrites the oldest file and records over it. When the G-r is ened, the dash cam front and rear automatically lothe current footage to prevent it from g overwritten in the case of a violent shake/collision, protecting critical footage. MicroSD cards with UHS speed cla U1 Cla 10 or higher are supported (TF Card Not Included).

【Support Max 256GB Card】

The accepts high-capacity micro SD memory cards up to 128GB (Not Included), providing additional video storage. It captures everything of the wonderful trip or scenery at any time and from any location.

【Connection of 24h Parking Monitor Kit】Use the 24h parking monitor kit to not occupy the arette interface.First, connect the negative pole(blaline) of the buline to the ground wire(GND-) of the car fuse box;Secondly, connect the positive pole(yellow line) of the buline to the BAT interface(BAT+) of the car fuse box;Finally,connect the red line of the buline to the ACC interface of the car fuse box.