Noyafa NF-802 High Quality Line Finder Wire RJ11 RJ45 Cat5 Cat6 ​High Low Voltage Cable LAN Network Cable

Product descrtion

1. Intelligent network cable

NF-802 is an intelligent network cable , uses advanced digital

demodulation to realize anti-interference and no noise tracing cables,

functions of wiremap, cable tracing, ing, and port f. It can test

the polarity recognition of the telephone line, standby, off-hook, ringing,

and LED indicator in different states. A tool for installation and maintenance of integrated wiring and weak current syst.

2. Cable tracing

~1) Short pre the emitter "scan" to enter wiremap/scan mode. The

indicator of the scanning on is on.

~2) After selecting the mode, connect the network cable/telephone

cable to be tested to the RJ45/RJ11 port of the emitter.

~3) Turn the receiver knob clockwise to turn on, adjust the sensitivity

of the received signal to the maximum, use the receiver probe to

approach the cable, when the receiver receives the signal, the

receiver emits a "Beep beep" sound, and the receiver line sequence

light turns red indicating the signal strength. The stronger the

received signal, the louder the sound and the more the lights are on.

so the approximate position of the cable can be quickly located.

~4）Note: The line sequence light of the receiver is green to indicate the wiremap result, and red to indicate the strength of the received signal.

3.Specifications

Emitter

~Suitable for network cable:CAT5 CAT6

~support：Anti-jamming scanning

~Low battery prompt:Below 3.3V+0.1V power indicator fes

~Singresponse speed: