NY-D02 Double Pulse Spot Welding Hine Encoder Time Digit Module Control Panel Plate Adjustable Current Controller-Foot Switch

The transformer is AC 220V to AC 9V

Operation descrtion

3.1 Operation display panel indicating lamp

3.2 Show state descrtion

Common control of the controller 3 Operation state, welding preparation, parameter query, parameter change

Welding preparation : Running light Always Time, current, interval, time, current indicating light out

Parameter query The operation indicates the lights, time, current, interval, time, and current relative to the light, the digital tube is always bright, and the value of the display is the corresponding parameter value.

Parameter change Operation indicator lights out, time, current, interval, time, current corresponding indicator light, digital tube flicker, and display value is corresponding parameter value change value.

3.3: welding preparation

By [selection] / Adjust the encoder counter clockwise rotation, Make the running light bright, time, The current, interval, time, and current indicate the extinction of the lamp, and the welding can be carried out at this time. The value of the digital tube is the current welds value.

3.4: voltage calibration

Because this controller has the function of net preure compensation, it is neceary to calibrate the voltage when the first time is installed, only one can be calibrated. (as long as the power transformer is not replaced, no recalibration is needed.)

Calibration operation:

In running state, the lights that are kept on a micro motion until the time, the current and the interval are all lit up. At this time, the market voltage is measured by , for example, the voltage measured at that time is 225V So, the rotary encoder makes the value of the digital tube display 225 You can then double click the fretting switch and exit the calibration.

3.4: parameter changes

When querying parameters, by [selection] / Adjust the encoder to rotate, query, indicating the light, the digital tube shows the parameter values of the current corresponding parameters.

For example: rotation [choice] / In order to make the interval light bright, the value of the digital tube is the interval time.

3.4: parameter changes

Take the change interval as an example

3.5 : count zero

This controller has the function of welding counting. In the proce of welding, each welding, the welding count is added automatically. 1 . Counting range 0-999.

If you want to clean up, when running, double click into / Preservation] on, count automatic clear 0.

4: Baby detail ture

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.