Outdoor Wifi Router 2.4G 300Mbps Wifi Bridge for Camera

Product Description: CPE120M is an outdoor 11N long-distance wireless bridge with LED display.
Support intelligent analysis, automatic optimal selection, the highest rate is 300Mbps.
The product supports mode, super mode, universal relay mode and AP mode, and the user application scenarios are more extensive.
Built-in 8dBi directional antenna, which can meet the long-distance wireless transmission within 1KM, and can realize point-to-point, point-to-multipoint outdoor coverage and application.
300mbps wireless Bridge Waterproof, dust proof, lighting protection.

Product detail:
Working mode:AP/Repeater Mode
Product Model: CPE120M
CPU: MT7628DAN
Flash: 8M
DDR2: 64M
2.4G working frequency band: 2.412 GHz - 2.484GHz
2.4G WIFI transmission protocol: 802.11 b/g
Built-in antenna 2.4G: 2.4G directional antenna*1, gain: 8dBi
SSID : support
Maximum rate: 300Mbps
Maximum support for wireless access: 50+
Interface:
1 * 10/100Mbps RJ45 WAN Port, support POE power supply
1 * 10/100Mbps RJ45 LAN Port
1 * LED display, show operation mode, , signal strength
Special feature:
Watchdog function
WEB comes with WIFI
Support TDMA
Power:POE 24V/0.5A
Button:
Reset button (long press for 10 seconds to restore the factory default configuration, short press for 1 second to initiate pairing)
1 DIP switch button (from left to right master)
2 digital display control keys; function key F and selection key S
Normal working temperature: -30°C to 55°C;
Limit working temperature: -40°C to 70°C;
Storage temperature: -40°C to 70°C;
Plug Type:EU Plug,it applies to Indonesia, Germany, France, , Italy and so on
Voltage: AC100-240V
size:168mm x 88mm x 57.6mm
Material: ABS
colour: white

Package Contents:
2 x Wireless Bridge
2 x POE Power Adapter(Note: , 't accept the specified color.)
2 x Network cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.