Plastic Welding Machine 220V Heat Guns Hose Welding Hot Air Torch Welding Tool With Nozzle Kit 10M Electrode 1000W

JP143101

220V 1000W Hot Air Torch Plastic Welding Gun Welder 10meter Welding Rods PP/PE/PVC/ABS/PPR each 2meter 1pc Heat Element

Features:

1.This is a plastic welding technique which is analogous to gas welding of metals, though the specific techniques are different.

2.This specially designed heat gun (hot air welder) produces a jet of hot air that softens the parts to be joined, as well as the plastic filler rod.

3.Hot air/gas welding is a common fabrication technique for manufacturing smaller itincluding and not limited to tanks, water tanks (black, grey, fresh & ballast), heat exchangers, and plumbing fittings.

4.The materials being welded and the welding rod must be of the same or very similar plastic. Welding PVC to acrylic is an exception to this rule.

Specifications:

Name:Plastic Welder

Color:

Power:1000W

Rated Voltage:220V

Temperature Range:50-550

Wind Preure:2800Pa

Air Volume:0.3 M3/m

Power Type:AC power supply

Rated Voltage Range:AC single phase and DC 50V and below

Type:Industrial hot air gun

Package Included:

1 x Plastic Welder

1 x Plastic Pipe

Use And Precautions:

-For the first time, there may be . This is a normal phenomenon, power will automatically disappear after 5 minutes.When the torch, please adjust the temperature to the lowest, until the barrel can be cooled before cooling, so as not to waste heat damage machine Pieces, affecting the service life.

-Plastic sheet is heated to 130-140 degrees when it becomes a soft state, a little preure to shape the welding temperature is generally about 240 degrees, from the welding nozzle mouth about 5-10MM at the temperature of 200-260 degrees; welding should be Note the distance between the nozzle and the solder joint to obtain the desired temperature.

-After the electric wire is broken, you can take the gun shell connection screw, remove the gun core, with the same specifications of the gun can be replaced.

-Welding torch with the complete light to light, so as not to break the gun part of the refractory porcelain material, leaving the electric wire short circuit.

JP143101

220V 1000W Hot Air Torch Plastic Welding Gun Welder 10meter Welding Rods PP/PE/PVC/ABS/PPR each 2meter 1pc Heat Element

Features:

1.This is a plastic welding technique which is analogous to gas welding of metals, though the specific techniques are different.

2.This specially designed heat gun (hot air welder) produces a jet of hot air that softens the parts to be joined, as well as the plastic filler rod.

3.Hot air/gas welding is a common fabrication technique for manufacturing smaller itincluding and not limited to tanks, water tanks (black, grey, fresh & ballast), heat exchangers, and plumbing fittings.

4.The materials being welded and the welding rod must be of the same or very similar plastic. Welding PVC to acrylic is an exception to this rule.

Specifications:

Name:Plastic Welder

Color:

Power:1000W

Rated Voltage:220V

Temperature Range:50-550

Wind Preure:2800Pa

Air Volume:0.3 M3/m

Power Type:AC power supply

Rated Voltage Range:AC single phase and DC 50V and below

Type:Industrial hot air gun

Package Included:

1 x Plastic Welder

1 x Plastic Pipe

Use And Precautions:

-For the first time, there may be . This is a normal phenomenon, power will automatically disappear after 5 minutes.When the torch, please adjust the temperature to the lowest, until the barrel can be cooled before cooling, so as not to waste heat damage machine Pieces, affecting the service life.

-Plastic sheet is heated to 130-140 degrees when it becomes a soft state, a little preure to shape the welding temperature is generally about 240 degrees, from the welding nozzle mouth about 5-10MM at the temperature of 200-260 degrees; welding should be Note the distance between the nozzle and the solder joint to obtain the desired temperature.

-After the electric wire is broken, you can take the gun shell connection screw, remove the gun core, with the same specifications of the gun can be replaced.

-Welding torch with the complete light to light, so as not to break the gun part of the refractory porcelain material, leaving the electric wire short circuit.

Product Picture:

JP143101

220V 1000W Hot Air Torch Plastic Welding Gun Welder 10meter Welding Rods PP/PE/PVC/ABS/PPR each 2meter 1pc Heat Element

Features:

1.This is a plastic welding technique which is analogous to gas welding of metals, though the specific techniques are different.

2.This specially designed heat gun (hot air welder) produces a jet of hot air that softens the parts to be joined, as well as the plastic filler rod.

3.Hot air/gas welding is a common fabrication technique for manufacturing smaller itincluding and not limited to tanks, water tanks (black, grey, fresh & ballast), heat exchangers, and plumbing fittings.

4.The materials being welded and the welding rod must be of the same or very similar plastic. Welding PVC to acrylic is an exception to this rule.

Specifications:

Name:Plastic Welder

Color:

Power:1000W

Rated Voltage:220V

Temperature Range:50-550

Wind Preure:2800Pa

Air Volume:0.3 M3/m

Power Type:AC power supply

Rated Voltage Range:AC single phase and DC 50V and below

Type:Industrial hot air gun

Package Included:

1 x Plastic Welder

1 x Plastic Pipe

Use And Precautions:

-For the first time, there may be . This is a normal phenomenon, power will automatically disappear after 5 minutes.When the torch, please adjust the temperature to the lowest, until the barrel can be cooled before cooling, so as not to waste heat damage machine Pieces, affecting the service life.

-Plastic sheet is heated to 130-140 degrees when it becomes a soft state, a little preure to shape the welding temperature is generally about 240 degrees, from the welding nozzle mouth about 5-10MM at the temperature of 200-260 degrees; welding should be Note the distance between the nozzle and the solder joint to obtain the desired temperature.

-After the electric wire is broken, you can take the gun shell connection screw, remove the gun core, with the same specifications of the gun can be replaced.

-Welding torch with the complete light to light, so as not to break the gun part of the refractory porcelain material, leaving the electric wire short circuit.

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.