Portable DIY Mini Spot Welder Machine 18650 Battery

Features:

The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.

Using automatic touch welding mode, while retaining the manual trigger interface, you can choose according to your own use.

Wide selection of welding supply: lithium battery supply or 12V car battery.

lithium battery supply or 12V car battery.

The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.With LCD display screen, can display welding parameters.



Specification:

Material: Metal

Input line length: app.20cm7.87in

Length of welding pen: app.30cm11.81in

Color: Red+Blue+Black

Battery: 18650 lithium battery(not included)

Package Weight:20x15x3M

Package size:210g



Noted:There are 99 gears in total. Do not exceed 50 gears, otherwise the possibility of burning will not be ruled out!



Instructions for use:

1. connection

The controller comes with a 20cm long 10AWG input wire. One end has been crimped with a U-shaped terminal, and the other end has not been processed. Connect the crimped U-shaped terminal to the control input terminal, and the other end is processed according to its own supply. Do not connect the negative electrode wrong.

2.Switch on and off

There is a switch under the control board. After pressing, wait for 3 seconds. After the drops, the LCD lights up and the boot is complete. Press the switch again to shut down.

3.Screen description and parameter adjustment.

4.Welding

Keep the welding pin clean. If the welding pin is polished into a round head, the welding effect can be improved. There are manual and automatic methods.





Package Included:

1Pc x Controller

2Pcs x Welding pen

2Pcs x input line (Red and Blue)

1 Pair x U-shaped cold-pressed terminal