4 major features of the upgrade:1: Protective shell2: IP68 waterproof, up to 3 meters underwater3: Manually balance4: distance 6-7cmProduct s:Model: TC100Working temperature: -35ºF (-37ºC) to 158ºF (70ºC)Operating frequency: 11.5 kHzWaterproof rating: the maximum depth is 10 feet (3 meters)IP68 tuning: automatic or manual tuningIndex: Proportional audio/vibration rateControl: power supply, right position, adjustment switchSize: Length: 9" (23cm)Thickne: 1. 6" (4.1 cm)Battery: Single 9V battery (not included)Operation information and tips:• The operation is completely automatic. All metals will be tested, including ferrous and non-ferrous metals.• When a target is detected, the TC-110 will generate an audio and/or vibration alarm. As the precise pointer gets closer, the rate of audio and vibration will increase proportionally•Because the TC-110 is a static, non-motion detector, it can achieve optimal operation when the unit is turned off between uses.• Avoid using TC-110 as an excavation or tool. It is designed to scan and accurately position the tip of a flat surface. It is not intended to use exceive force.• When using water, the depth must not exceed 10 feet (3 meters). Make sure that there is no sand, sediment, etc. on the battery cover threads. The o-ring is regularly lubricated with silicone oil to maintain a tight seal.• To remove dry dirt, or other debris, simply wash it by hand with soap, water and a soft cloth. Do not use any s or chemical cleaners that may scratch or erode the surface.Product precautions:Low battery alarm:When the battery is low, the detector will send out an alternate two-tone alarm. Rep the 9V battery as soon as poible.Battery repment:Just turn the battery cover counterclockwise and tighten it clockwise. To install the 9V battery correctly, match the larger battery terminal with the larger opening in the compartment. When storing for more than 30 days, remove the battery.
Packing List:
1xHand Held Metal Detector
1xUser Manual
1xBracelet