Pure Sine Wave DC 12V TO 230V 1000W/1200W/2000W Car Plug Adapter Power Converter With 4.2A Dual USB Charging EU Socket

Specifications：

- Output Waveform：Pure Sine Wave- Peak Output Power：1000W/1200W/2000W- Continues Output Power：500W/600W/1000W- Frequency：50Hz/60Hz- No load current draw： 90%- Input DC Voltage：12V- DC Voltage Range：9V-15.5V- Output AC Voltage：220V- AC Voltage Range：210V-230V- Low Voltage Alarm：10V DC±0.5V- Low Voltage Shut Down：9V DC±0.5V- Over Load：Shut Off Output- Over Voltage Shut Down：15.5V- Over Thermal： Shut Off Output Automatically- ：Short Circuit- Start：Soft Start- Warranty：1 Year- Machine Size：240MM * 112MM * 60MM- Weight：1.2KG- Material：Aluminum Alloy- Socket Style：EU/Universal- 8 Safety Protection Function：①Re polarity protection②Low input voltage?protection③High input voltage protection④Over-current protection⑤Short circuit protection⑥Over temperature protection⑦Overload protection⑧Internal fuse

Working prince of

A power conversion device that converts input low-voltage direct current into high-voltage stable alternating current output.Instructions:The output volts of the battery should be consistent with the DC input volts of the . For example, a 12V should be selected for a 12V battery, and the positive and negative poles of the battery should be distinguished when connecting.H (working time) = U (voltage volts) × I (battery capacity) × 0.8 × 0.9 ÷ electrical power

Precaution

1.The cannot be connected to the power grid and cannot be used to touch the AC output line. The battery equipped with the can provide more power than the actual power consumption of the appliance. When the battery line is lengthened, the corresponding wire diameter must be doubled Crude.2.Both of the outputs are live wires, and there is no grounding problem. Do not use any one as a ground wire.3.Connect the to the load. Do not connect any air switch or leakage protection switch in the middle. Hard operation will not only fail to protect, but will damage the .

Troubleshooting

1.The is not working.A.Chewhether the plug is inserted in p and whether it is loose.B.Whether the switch is turned on.C.Whether the car arette has voltage output, such as external leads, and whether the polarity is correct.2.Insufficient output power of the can only drive low-power electrical appliancesA.The capacity of the battery is too small, and electrical appliances must be repd or reduced.B.The battery voltage is too low and must be charged or repd.C.If you change to another car, the is normal, and you need to go to a profeional repair shop to thicken the car arette cable. The use of the arette socket shall not exceed a load of 150W.D.If it is an external battery, thicken the lead to shorten the lead length3.The does not work and the FALT light is offA.The electrical power used exceeds the nominal power, causing protection. Reduce the use of electrical powerB.The battery voltage is too low, the battery must be charged or repdC.Reduce the use of power appliance