This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
Shipped from abroad
Free return within 7 days for eligible items.Details
Yankkios
90%Seller Score
24 Followers
Shipping speed: Good
Quality Score: Excellent
Model: 1000W
Peak power: 1000W
Continuous power: 500W
Input voltage: 12V/24V/48V/6OV
Output voltage: 220V
Frequency: 50HZ
Output waveform: pure sine wave
Size: 175×10.4×58 (CM)
Net weight: about 0.8KG
Model: 1600W
Peak power: 1600W
Continuous power: 800W
Input voltage: 12V/24V/48V/60V
Output voltage: 220V
Frequency: 50HZ
Output waveform: pure sine wave
Size: 21.3×10.4×58 (CM)
Net weight: about 1KG
Model: 2000W
Peak power: 2000W
Continuous power: 1000W
Input voltage: 12V/24V/48V/60V
Output voltage: 220V
Frequency: 50HZ
Output waveform: pure sine wave
Size: 253×104×58 (CM)
Net weight: about 1.2KG
Model: 2600W
Peak power: 2600W
Continuous power: 1300W
Input voltage: 12V/2V/48V/60V
Output voltage: 220V
Frequency: 50HZ
Output waveform: pure sine wave
Size: 33×103×6 (CM)
Net weight: about 1.4KG
Model: 3000W
Peak power: 3000W
Continuous power: 1500W
Input voltage: 12V/24V/48V/60V
Output voltage: 220V/110V
Frequency: 50HZ/60HZ
Output waveform: pure sine wave
Size: 258×15×7.5 (CM)
Net weight: about 2KG
Troubleshooting
1 Inverter does not work
a. Check whether the plug is inserted in place and whether it is loose.
b. Whether the inverter switch is turned on.
C. Whether the car ette jack has voltage output (such as external lead, polarity
is it right or not)
2. Insufficient output power of the inverter can only drive low-power electrical appliances
a, the battery capacity is too small (need to replace or reduce the use of electrical appliances
b. The battery voltage is too low (need to be charged or replaced)
C. If the inverter is used in other cars, the inverter is normal, and you need to
The profeional repair shop bolds the lead of the car ette jack (use the ette jack
No more than 150W load)
d. If the battery is connected externally (the lead wire must be thickened to shorten the lead length)
3. The inverter does not work and the FALT light is off
a. The electrical power used exceeds the nominal power, causing protection (reduce the use of
Electrical power is sufficient)
b. The battery voltage is too low (the battery must be charged or replaced)
C. Reduce the use of power appliances
4. High case temperature
a. It is a normal phenomenon within 65℃ (with temperature protection included)
Precautions for use
1. The inverter cannot be connected to the power grid, and the AC output line cannot be touched by hand. Inverter
Equped with a battery can provide more power than the actual power consumption of the appliance, when the battery line is lengthened
At the same time, the corresponding wire diameter should be doubled. 《For example: 12V2000W inverter
Factory configuration battery line 10 square 50CM long line, in actual use may use 100
If the CM is long, the wire diameter should be added to 20 square, that is, use a 20 square 100 CM wire. "
2. Both of the inverter outputs are live wires, so there is no problem of king up the ground. Do not connect any
The root is used as a ground wire, and it is not connected to the earth.
3. Connect the inverter to the load, do not connect any air switch or leakage protection in the middle
Switch and hard operation will not only fail to protect, but will damage the inverter in turn.
About shping
This product has no ratings yet.
Subscribe to our newsletter
and be the first one to know about our amazing deals!