RD6012 RD6018 Switch Power Supply 65V 800W Digital Power Supply Case S800 For Cold Rolled Steel Shell Combination Kit

RD RD6012 RD6018 Switch Power Supply Digital Power Supply Case for RD6012 RD6018 Cold Rolled Steel Shell Combination Kit

RD6012 RD6018 Case

Aembly Preparation:

1.1pcs RD60XXdigital power supply, 1pcs S800case, 1pcs 800W switch power supply

2. Tools, acceory(DC power supply, 3 pin plug cable, multimeter, screw driver, test pencil...)

3. Proper aembly environment

Aembly step:

Note:The case material is a bit soft and may be slightly deformed during transportation. If there is a gap during the aembly, please straighten it before aemble it.

1.Check the acceories: check if the acceories ofS800are same as acceorieslist or acceory picture.

2.Check RD60XX:Adjust input power supply to 12v/1A to power on RD6012, and set 5V/1A output on RD60XX, turn on the output to see if the output is normal.

3.Back board aembly: install the rocker switchandAC power socketon the lower board.

4.Connect cables to switch power supply: (dangerous,non-profeionals should not operate)

Uselongbrown cable to connect therockerswitch and the live wire (L) of the switch power supply;

then useshortbrown cable to connect therockerswitch and the live wire (L) of the AC power socket;

Use the blue cable to connect the neutral wire (N) ofAC power socket and the neutral wire (N) of switch power supply;

Use a yellow-green two-colorcableto connect the ground wire (E) ofAC power socket and the ground wire (〨) of switch power supply.

Use two red cables to connect the IN+ of the green terminal and the positive electrodes (+V), and use two black cables to connect the (IN-) of the terminals and negative electrodes (COM).

Install the temperature sensor extension board to the back panel.

5.Aemble the switch power supply：Installthe switch power supply on the lower board

6.switch power supply test:

Check the wring again and power on the switch power supply, and use test pencil to check the power and insulation status. Then use multimeter to check if the 60V output is normal, then use screw driver to adjust the output of the switch power supply toabout68V.

7.RD60XX aembly：If you have CR1220 battery, pleaseinstall the battery with the positive side facing up, if you have WiFi module, please install it like what shows in the picture. InstallRD60XX to the front side in the correct way, otherwise it cannot be installed properly, we make flame tight to prevent the RD60XX from shaking, if the case is slightly deformed, you can gently bend the case to make itstraight.

8.Connect the rest cables:insert the external temperature sensor cable, insert the green terminal and sort out the cables.

9.Install the screws of the case.

10.Install the foot pads.

11.If you need to use external temperature detect, you can insert the external temperature sensor cable to be back end of the case, and do final test.

Package includes:

1*Upper Board

1*Lower Board

6*Connecting wire (2*brown, 1*yellow-green double color, 1*blue, 1*red, 1*black)

1*KCD3 rocker switch

1*AC power socket（AC-04）

4*non-slip foot pad (Φ13*4)

11*Shell fixing screws (M3*4 round head)

10*Flat head(M3*6 )

Notice:

1. Prevent short circuit during aembly, and connect the positive and negative poles correctly.

2. Do not connect the circuit when the power is on.

3. Try to avoid shaking and falling.

4. The shell is made of cold-rolled steel plate material, and the surface is sprayed with plastic. When aembling and using, it should prevent sharp objects from scratching, and avoid direct sunlight and humid environments.

5. Since the aembly proce involves a voltage that exceeds the safety of the human body, non-profeionals should not operate it. Take insulation and protective measures during the aembly proce, and place this product in a place that is difficult for children and the elderly to touch.

RD6012 RD6018 power supply 65V 800W

About shipping
Shipping and Packaging All items will be double checked and well packed before sending.Items will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.