Red Mini Sewing Machines work Hand-Held Clothes Useful Portable Sewing Machines Handwork Tools Accessories

Product Specifications:Home Mini Sewing MachineMaterial: plastic + metalSize: *25*7mmManual operation Automatic feeding adjustment stitchThe size of sewing clothes should not exceed 1mm, which is equivalent to the width of jeans folded in halfCorrect use of manual micro sewing machine:1. Hold the machine: Hold the machine base with four fingers of the right hand, and p the thumb on the upper cover of the machine body to hold the machine smoothly.2. Threading: Gently pull out the thread on the spool. Then pa through the lead wire. Temporarily p the lead thread beside the , and pa the threader from the front of the (to the body joint) through the hole, then introduce the thread into the small hole of the threader, exit the threader and pull out the thread for about 2 -3cm ing plate can be preed and ready for use.3. Placing the cloth: Use the index finger of the right hand to lift the preing plate, put the fabric to be sewn (thickne not more than 0 mm) flatly under the preing plate, and gently put it back on the preing plate to pre the fabric;4. Sewing operation: Hold the fabric with the left hand, pre the top of the upper cover gently and quickly with the thumb of the right hand and pre the top of the cover to the bottom, and then pre the thumb down again. Repeatedly, the cloth feeding mechanism automatically sends the sewn material to the left. The right hand of the machine is gradually moved to the right, and the left hand is holding the cloth to gently move the sewn material to the left according to the sewing rhythm until the sewing is completed; From the reverse side of the fabric to be sewed, pull out the end of the thread, put it into the next stitch and tie a knot, then the stitch will be firm; do not pull the thread by hard pulling the fabric at the end of sewing head, so as not to damage the s and pins;6. This machine can automatically feed the cloth and adjust the tightne between the pins, but pay attention to the following points: if the pins are too tight, adjust the preure nut slightly counterclockwise; if the pins are too loose, adjust the preure nut slightly clockwise; Stitches are tight. If the stitches are larger, the left hand can be slightly faster to pull the cloth. If the stitches are denser, the left hand can be slightly slower to pull the cloth;7. Replacing the spool: If you use a large spool, you can connect the spare extension rod to the spool shaft and put it into the larger spool. Put the spare plastic cap on the end of the rod to fix the large thread, then re-thread the thread, adjust the tension of the thread and sew; use cotton thread or synthetic thread effect.8. change: Loosen the fixing screw and take out the broken . Install a new as shown, be careful to make the flat face of the face up to the fixing screw, do not install it backwards. Pocket type, manual operation, the sewing machine has the functions of automatic cloth feeding and adjustment of the tension between the stitches to achieve profeional results;-Product Details----------------------------------------