RISC-V Milk-V Duo Development Board Kit Dual Core CV1800B Support Linux for IoT Enthusiasts DIY Gamers

[Product Introduction]. Milk-V Duo is an MPU developed based on CVITEK CV1800B chip that can run LINUX and RTOS.. Milk-V Duo provides professionals, industrial OEMs, IoT enthusiasts, hobbyists, DIYers a reliable, low-cost and extremely capable platform for building and tinkering with their ideas, helping them become Reality.
[Product parameters]. Processor: CVITEK CV1800B (906@1GHz; 906@700MHz). Memory: DDR2 64MB. Storage: 1 Mirco SD slot, 1 SD NAND pad. USB: 1 Type-C for data and power, 1 USB2 pad. Camera: 1 16P FPC socket (MIPI CSI 2 channels). GPIO : 26 pins available for general purpose I/O (GPIO). Size: 21mm* 51mm
processor:. 1GHz and 70OMHZ RISC-V C906 processor []Integrate CVITEK TPU to realize intelligent detection. Support H.264/H.265 video encoding, up to 2880x1620@20fps. Compatible with HD CMOS sensors. Programmable frequency output for sensor clock. Comprehensive ISP features for image optimization. Some OpenCV libraries support CV hardware acceleration. 16-bit audio codec with built-in microphone input and output. Flexible network configuration with 1 Ethernet PHY
CSI-2 (MIPI Serial Camera):With 16-pin FPC interface for 2-wire MIPI camera input. Operate l2C, CLK and RST signals at 1.8V voltage level
Ethernet:Milk-V Duo includes CV1800B chip and 100Mbps physical layer. PHY connected to 5-pin pad. Ethernet use requires external transformer and RJ45 socket. GPIOs:Up to 26 GPIO pins on the MilkV Duo 40-pin header to access internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART.Up to 3xI2C. up to 5xUART. Up to 1xSDIO1. Up to 1xSPI. Up to 2xADC. Up to 7xPWM. Up to 1xRUN. Up to 1xJTAG

USB interface:
Compatible with USB 2.0, backward compatible with USB 1.1
Support for various speed modes, host/device capabilities and transports
protocol:
Scalable interface via USB hub (up to 127 devices)
Power saving mode, support HID devices
USB with configurable software
USB Type-C for accessing storage media
Micro-SD:
SDIO 0 is compatible with the Secure Digital Storage (SD3.0) protocol
Board Specifications:
Single-sided PCB
Size: 51x21mm
Thickness: 1mm
Type-C port located on the top edge
Dual Slotted/Through Hole Headers Around Remaining Edge
Available as surface mount modules or in dual in-line package (DIP) format
40 primary user pins on 2.54mm (0.1inch) pitch grid with 1mm holes
Compatible with veroboard and breadboard
Please note that due to different batches, there may be differences in the appearance, color, and printing of the product, which will not affect its use
Colour:random colors, don't accept the specified color
Material:PCB

Package Contents:
1 x Milk V Duo
1 x Breadboard
2 x Row bus
1 x Data cable
2 x Pin arrangement

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.