Descrtion: LCD display frequency and duty cycle, very clear, PWM output can be set to the frequency and duty cycle; Wide frequency range, high precision; Serial communication, TTL level; Module Feature: PWM output, you can set the frequency, duty cycle; Frequency is divided into four ranges, automatic switching: XXX (no decimal point): the smallest unit is 1Hz, the value range of 1Hz - 999Hz; X.XX (decimal point in the hundred) the smallest unit is 0.01Khz, the range of 1.00Khz - 9.99Khz; XX.X (decimal point in ten): the smallest unit is 0.1Khz; value range of 10.0KHz - 99.9KHz X.X.X (decimal point in ten and hundred): the smallest unit is 1Khz; value range 1KHz - 150KHz Frequency display: 100 indicates PWM output 100Hz pulse; 1.01 indicates PWM output 1.01K pulse; 54.1 indicates that the PWM output has a pulse of 54.1 kHz; 1.2.4 indicates that the PWM output is 124 kHz pulse; Duty cycle range: 0 - 100%; All set parameters, power-down automatically saved. Parameter Settings: The module has four independent keys, used to set the frequency and duty cycle, support touch (increase or decrease a unit) and long pre (fast increase or decrease), set the parameters automatically save, power down Not lost. Module Parameters: Working voltage: 3.3 - 30V; Frequency range: 1Hz - 150KHz; Frequency accuracy: the accuracy in each range is about 2%; Signal load capacity: the output current can be about 5 - 30ma; Output amplitude: PWM amplitude equal to the supply voltage; Ambient temperature: -20 - +70 degree Application: Used as a square wave signal , generate square wave signal for experimental development and use; Used to generate a square wave signal that controls the motor driver; generate adjustable pulse for MCU use; generate adjustable pulse, control the relevant circuit (PWM dimming speed and other applications). Serial control (single-ch TTL level communication) Communication Standard: 9600 bps Data bits: 8 Stop bit: 1 Check digit: none Flow control: none 1, set the frequency of the PWM "F101": Set the frequency to 101 HZ (001 to 999) "F1.05": set the frequency of 1.05 KHZ (1.00 - 9.99) "F10.5": Set the frequency to 10.5KHZ (10.0 - 99.9) "F1.0.5": set the frequency of 105KHZ (1.0.0 - 1.5.0) 2, set the PWM duty cycle "DXXX": set the PWM duty cycle to XXX; (001 - 100) Such as D050, set the PWM duty cycle is 50% 3, read the set parameters Send a "read" string to read the set parameters. Set succefully return: DOWN; Setup failed to return: FALL.
About shpingShping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer).
Special Announcement:Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .
Your 100% satisfaction is very ant to usIf the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.