SMARTOUR BSM BSA 24Ghz Millimeter Wave Blind Spot Driving Safetye Change ist istant BSD Driving Safety

FUNCTION INTRODUCTION

Ar installation of this system, when the vehicle is started,the microwave rs on both sides of the rear will send a microwave sounding

signal backwards. When a vehicle in the blind area is detected to be approaching, the system will procees the reflected signal. When it confims,that there is an object approaching,it alerts driver by iuing the corresponding sound and light signals.When the vehicle is approaching, the corresponding side of the LED lights will be lit to prompt the rear of the vehicle near

When the LED is lit, if the driver turns on the corresponding turn signal, theLED will f and the will sound to indicate that the tumaround

is risky at this time.

1.Rainy weather, windshields and mirrors are covered with water droplets, blurred vision, change the road is very dangerous

2.Foy weather, ffic visibility is low,line ofsight shorter, rear blur mirror, changinges is dangerous.

3.Snowy weather,gla, mirrorice, eyes were disturbed, blurred vision, change the road is very dangerous

4.Inattention,chatting with other people, blind change, very dangerous WIRINGAr the vehicle is stopped, the system delays for 30s. When there are bicycles, electric cars, motorcycles, pedestrians and other vehicles nean

he vehicle, the system will light up and there is a risk of opening the doors. Please confirm the safety before opening the doors

THE APPLICATION FEATURES AND SCENARIOSYellow line is connected with common battery, battery B +

● Red line then ACC +

Black line grounding

Turn lights connect to the positive of the correspondinglampOther extension wire directly marked according to the mark

INSTALLATION REQUIREMENTS

INSTRUCTIONS FOR 1.When it detects moving vehicle or people near, the corresponding LED warning light will f to alarm.

2.When the alarm light is on, if the driver turns on the corresponding turn light, the LED alarm light fes, and the sounds alarm.1.The signal nsmitting surface of the r can only penete

the plasticper shell and can not penete the metal.

2.The r may be affected by fluorescent light

3.The r should be firmly fixed with a bracket or 3M without shaking

4.The r terminals are vertically downward and parallel outward 25