Soap Dispenser, Touchless Automatic Soap Dispenser, Infrared Motion Sensor Stainless

Product Description

【The Latest Version Of The Automatic Soap Dispenser】Automatic Sensor Soap dispenser use the latest design free-standing adjustable button, with built-in precise infrared motion and PIR sensor detection technology. The upgraded sensor prolongs the working life of it and is sensitive more so you can get the hand soap quickly.

【New Automatic Induction Outlet Method】Just put your hand under the sensor to start the soap dispenser. You can control the amount of soap by moving your hands. When your hands are away from the sensor, the soap dispensing stops. No water or soap drops. You don’t need to touch the soap dispenser so as to avoiding cross infection effectively.

【Full Protection Base (Waterproof And Leak Proof)】The non-contact soap dispenser adopts 3A class leak proof and waterproof technology to prevent soap or water from corroding circuit boards. The new design of the waterproof base bracket with rubber seals helps prevent the box from corrosion by immersing it in water and the sensor from operating.

【Suitable For All Kinds Of Soap】It is compatible with all kinds of such as hand sanitizer and hand soap, and it is also suitable for hand or body lotion and disinfectant.

Feature

★Need to install 4 AAA batteries
Installing 4 new AAA batteries in soap dispenser, which allows the soap dispenser to work better and increase the service life.

★Double waterproof base
The soap dispenser has a double base. It is designed to better protect the from water, which it's the biggest difference from other brands soap dispenser.

★High-accurate sensing mode
You can control the amount of soap by moving your hands. When your hands are away from the sensor, the soap dispensing stops. No water or soap drops.

Specification

Material: Stainless steel

Capacity: 280ml/9.56oz

Power Supply: 4x AAA Alkaline (not included)

Dimensions: 7.5*18.5CM

Operation instructions

1. After unpacking and removing the product, open the compartment at the bottom of the fuselage, and insert 4 AA 1.5A alkaline batteries (1.2V rechargeable batteries cannot be used) in the direction of the positive and negative electrodes, and then cover the batteries Cover

2. Press and hold the switch button on the head of the fuselage for 3-4 seconds. After observing the indicator flashing once, release the switch button, the indicator goes off for a long time, at this time, it means that it is turned on and enters normal working state
(If the indicator is on after you release the switch button, please do not proceed to the step, contact customer service for help.)

3. At this time, do not add first, place your hand under the "liquid outlet", and observe whether the indicator will illuminate, and accompanied by the sound of pumping sound of cuckoo, after the pumping sound stops, remove your hand. The indicator is off, then put it under the outlet, repeat 3-4 times to see if the indicator will be on and there will be a pumping sound

4. After several operations according to point 3 are normal, press and hold the switch button for 3-5 seconds until the indicator turns red. At this time, the machine has been turned off. Align the base with the bottom of the fuselage and install it. Straight on a flat surface

5. Rotate the cap of the inlet on the fuselage head and open it to add the you need to put in. Pay attention to the inlet during the addition process. Do not add to the outside. The port can stop adding for 3-5 cm, put the lid back and screw it tightly;

6. Repeat the step 2 to turn on the machine, and then repeat the step 3. Repeat the induction until the comes out (the first time you need to operate the sensing action several times before the is discharged, because there is a period of time when the is drawn to the outlet Itinerary)