Stainless Steel Indoor Outdoor Folding Modern Space Saver Minimiser Wall Mounted Cloth Drying Rack Hanging Stand for Clothes Dryer/Towels Ideal for your Bathroom Corridor Balcony 7 Rods 3 Feet -Multicolor

Compact retractable wall mounted cloth dryer stand is designed to maximize your limited space. A durable practical option for drying where you have spare wall indoor and outside. Its stainless steel and rust proof it will fix your convenient height. It is maintenance free and space saving after use hanger can be pushed back to wall. Wall mount hanger is available for 2 to 6 feet length and the rack is 7 line. We customize the customer requirement. Maximum load capacity is 30 . suitable for indoor and outdoor area, laundry room, bedroom, bathroom and wash basing rods.

It is not how big the house is, it is how organized you make it to call it your HOME. Wudore strongly believes in optimal space utilization for organized living. Our Urban homes concepts primarily focuses on hardware and tools that help improve the way you utilize your home real estate. Our Wall cloth dryer is an innovative product that primarily focuses on using your wall space for cloth drying and silently sink into the wall when not in use.

1. Strength focus design. Technically given ribs on each side plates to improve strength.

2. Wudore uses 12.7 mm stainless steel pipes while most other products use 9 mm SS pipes.

3. Dismantle to dispatch: Our product comes in a well packed, dismantled condition. This avoid any pipe bending during transit.

4. We use 0.8 mm stainless steel tubes and heavy grade side plates to give strength to the entire structure.

A Perfect Wall Mounted Minimiser for your Balcony

The Wall Mounted Cloth Dryer from Wudore will ideally suit any balcony including that that have a constraint of floor space or lack of a ceiling/roof. The product is available in variants of 1.5 feet to 4 Feet for your comfort.

An Ideal Wall Mounted Minimiser for your Bedroom

Stop using the bed corners as a towel dryer. Now you can install a Wudore Wall Mounted Cloth Dryer as your towel dryer that uses any of the us-used wall spaces.

An optimal Towel rack inside your Bathrooms

Urban apartments always throw a challenge of bathroom organization. The minimiser from Wudore is a boon in disguise where bathroom space is a challenge. Install the the wall hanger in place of your standard single bar tower rack. The minimiser enables you to recover space when you do not need the hanger.

4 Step Installation Guide

Fix the Pipes In the Left Side Holder Drive the half inch pipes provided by us into the cylindrical chambers of the side holder. From the other side, use the small screws provided to lock the pipe in the side holder.	Fix The Pipes In the Right Side Holder Now that the pipes are already fixed into the left side holder, repeat the same steps to fix the pipes on the right side holder. Use the small screws to fasten the SS pipes into the side holder. Now the complete wall hanger frame is ready.	Mark the Installation Position Using a pencil and the help of a good friend, Hold the entire frame on to the wall where you would like to install. Mark the screw position of the back holder onto the wall. Each holder has 2 holes to be marked. Use a drill machine to drill holes onto the wall.	Fix the Cloth Dryer to the wall Once the holes are drilled on the wall. Drive the nylon plugs into all the 4 holes. With the help of your good friend, hold the wall hanger onto the position and fix the screws using a screw driver. Your Wall hanger is ready.

More About Wudore Wall Mounted Cloth Dryer....

Technical Specifications

Composition

• 202 Grade Stainless Steel 
• 12.7 mm crack free SS pipes 
• Heavy Duty Screws 
• Virgin PPCP plastic parts for side holders. 
• Available in 1.5 feet, 2 feet, 2.5 feet, 3 feet, 3.5 feet, 4 feet variants 
• No Sharp edges. Ribs for extra strength 

Maintenance

Wudore wall hanger is a low maintenance one time install product that needs minimal attention.

Use little home oil in the folding corners to improve performance. Remove any debris and dust in the folding parts using an old tooth brush.

A clutter free home is a happy home

An Ideal Urban Dwellers choice

The product is a perfect blend of strength and performance. The side holders are specifically designed to ensure there are no sharp edges and strengthening ribs added to the plates that enhance the structural strength and improve load capacity of the product.

Precautions

• Avoid installing the product in a position that block free movement.
• Avoid rubbing with the edges though they are flattened and no sharp edge.
• Once the rods are fixed into the side holders, do not remove them during house shifting. Uninstall the entire frame from the wall and carry it as it is.
• Avoid installing the product in a balcony that is close to the sea.

• Automatic Cloth Drying Hangers work with warm gear technology its helps customer to raise and down easily with load.
• Easy lift hangers are made of stainless steel
• The load capacity of the hanger is 30 kg
• Our Hanger suitable for balcony, portico, sunshade and individual rooms.
• We can set the pole length according to the customer need