Supply 6 large screen LED digital display electronic length measuring instrument, meter counter and length counter.

DIY Supplies : ELECTRICALBrand Name : TailKuKeFreight number : 140306Decoration and construction content : Installation engineering modname=ckeditor Type1:1MM  meter wheel Type2:1CM Holzer switch Type3: reset on box Type4:1CM proximity switch Type5:30CM reflection optoelectronic Type6:5M photoelectric photoelectricity Reminder: this price is the price of the counter, and does not contain other accessories such as sensors. If you need to purchase, please order separately!!!   Product overview: The JMS-6D6C meter is simple in operation and fully functional, and can be used for various occasions. Wireless remote controller setting, 6 bit LED Digital tube displayClear, intuitive and convenient. Can be realized ratio Preset value, keep decimal digit setting, pulse frequency setting work. can. Products are widely used in printing, machinery, packaging, textile, food and other industries.     Product : Rated power supply voltage:DC12/24V Working voltage range:Rated voltage 85%-110% Working temperature:-10~50 "C Data preservation time:More than 10 years Reduction method:Connection terminal, shake control reset Insulation resistance:≥300M Power output:DC12V/MAX30MA Meter meter method:Add meter Meter error:± 1 pulse Meter range:0.001-999999.999 Ratio range:0.001-9.999 meters Meter signal input:NPN transistor / contact / voltage Decimal digits:0-3 bits   Instrument use and operation methods: Before the instrument is used, please read the instructions in detail first, check whether the connection terminals are connected correctly and whether the power supply is in conformity with the requirements. There are four keys in the face of the controller: A B C D B settings key:Press this on in the meter position to enter the instrument parameter setting state. C shift key:Pressing the key in the set state can move the flicker bit. A number key:Pressing this on in the set state can increase the flicker bit by 1. D reset key:Pressing the key in the meter state can zero the count value.