Tank Filter Water Separator Assembly for Oil S

1. Keeping A Clean 496-5 Filter In Your Vehicle Can Reduce Damage Done To Your Engine And Other Delivery Components.
2. 30 Micrometres, Provide High Flow Rates And Superior Filtration Efficiency, Protect s From Particles Such As Rust, Sand, Dirt And Water.
3. With Protective Sheet To Prevent The Filter Elements From Being Destroyed Or Deformed By Pressure.
4. With 1inch Npt Fittings Inlet And Outlet Marked At The Top Of The Cap.
5. Use 495-4 Tank Filter Bowl, Makes It Easy To Visual Monitor The Flow, The Flow Will When You Need To Replace The

Fits Common s Such As Unleaded , Crude Oil, Oil, Up To 20% Biodiesel (B20) And Related Additives.Elements. Drain Valve Installed At The Bottom To Drain Water.
Installation:
1. Attach Filter To Storage Tank Valve On Opening Marked "In".
2. Attach Hose And Nozzle To Filter Opening Marked "Out".
3. When Installing The Elements And Bowl, Apply A Coating Of Oil To Each Side Of ket.
4. These Components Should Be Hand Tightened Only. Over Tightening Of The Filter Bowl Will Result In Difficulty In Removal At A Later Date.
5. When Assembly Is Complete, Check For Leaks.
Filter Elements:30 Micrometres With Protective Sheet
Inlet/Outlet Size:1inch Npt
Hyaline Bowl With Drain Valve
Flow Rate:Max 25 Gpm
Working Pressure:Up To 150 Psi
Gravity Flow Rate:Approximately 5 Gpm
Colour:As Shown
Material:Nylon + aluminum
Size:Height:9.5inch

Package Contents:
1 * B10-AL Oil Storage Tank Assembly
1 * Wrench
1 * Raw Material Belt

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.