This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
Shipped from abroad
Free return within 7 days for eligible items.Details
CharacterL
100%Seller Score
25 Followers
Shipping speed: Excellent
Quality Score: Excellent
Module performance:
Input voltage: 4.35-6 V (recommended voltage: 5 V)
Cut off voltage: 4.2 V + / - 1%
Maximum charging current output: 1000 Ma
Battery overcharge protection voltage: 4.28 v
Battery overcharge boost: 4.00 v
Battery discharge protection voltage: 3.0 v
Battery discharge termination voltage: 3.2 v
Battery: over current protection current 3 A
Circuit board size: about 2.5 * 1.65 cm
Light status: no load light is not on, red light charging, full green light.
Characteristic:
1) . high quality charging ch tp4056, simple circuit, good protection value and high charging accuracy.
2) . automatic hining of the whole hine, high reliability.
3) . the output current can be adjusted from 100 to 1000mA automatically by simply replacing the fixed on the circuit board.
Note:
1) . can only be connected to the 5V input port of the module.
2) . The charging current is preferably 37% of the battery capacity. For example, the charging current of 1000mah battery should be 400.
3) . The connection wire cannot be too thick.
4) . Make sure the connection point is good.
5) . If the input voltage is too high, for example, 5.2v or even 5.5V, the charging current will be le than 1000mA, which is normal. When the voltage is too high, the ch will automatically reduce the charging current and protect the ch from burning. In addition, when the working temperature of the ch is about 60 °, the ch feels hot is normal.
About shping
This product has no ratings yet.