TENG MILE Flywheel Locking Tool with 36m/4’’ Socket for 6.6L max Auto Tools Professional

Flywheel Locking Tool with 36m/4’’ Socket for 6.6L max

Descriptions:Material: metalPackage Weight: 0.7kgSize: 14.5*13.1*5.4cmPackage Includes:1set Flywheel Locking ToolBenefits -- Locks flywheel in p when removing harmonic balancer on 6.6L max engines with Allison automatic nsmiions. Saving time than removing the starter for water repment.max 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded plate on the bottom of the nsmiion. Tool should slide into opening toward engine with the top of the tool ening the teeth of the flywheel.max 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber cap on the bottom of the nsmiion. Insert the tool at the front of the opening to ene the flywheel and hand tighten bolt to hold tool in p.36mm Socket -- Use 36mm 12 point socket with 3/4" square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle.

"We aims to provide the best service for our customer,If you have any problem about your order, please feel free to contact us."