Thickened copper fire-fighting type blooming DC, high-pressure car wash garden irrigation water gun nozzle

Product description:

bra one-inch internal wire fire-fighting nozzle:

overall length: 78-85mm; internal thread length (including gasket): 10mm;

copper body diameter: 33mm, maximum outer diameter: 50mm (anti-collision O-ring);

single Net weight: 370g; inner diameter of water inlet: 19mm;

inner diameter of sprinkler outlet: 27mm, water output is approximately

equivalent to the flow rate of a 15mm water column;

applicable temperature: 0℃-60℃; maximum preure resistance: 3.0MPa.

Our fire-fighting water gun has a relatively large water output. Generally, it is recommended that the water pump be configured with a power of 700 watts or more, an effective length of 30 meters or more, and the inner diameter of the hose more than 20 mm. It is recommended to configure a water pump with a higher power and a larger hose interface for the nozzle with more than one and a half inches. For the sprinkling effect of specific styles of water, please refer to our video (there is a text explaining the water source in the video). Please note that if the water pump is put into a well or river to pump water, the height difference needs to be reduced, and the effective Yang Cheng left for the water gun should be more than 30 meters.

The head of the pagoda joint anti-collision

one-inch inner wire fire-fighting water gun nozzle:

(total length: about 12-13 cm, weight: about 445-455 grams)

Pagoda connector, one inch copper ball valve,

one inch inner wire fire-fighting water gun nozzle:

（total length: about 20-22 cm, weight: about 795-805 grams)

Pagoda connector specifications: one inch-connect to 25 mm inner diameter hose,

one inch two-connect to 32 mm inner diameter hose. Please measure the inner

diameter of the hose before shooting! It is recommended to use a reinforced

connection with stainle steel pipe clamps/clamps, and it is recommended

to use raw material tape for the direct thread connection between the sprinkler

and the pagoda joint. The nozzle part can be rotated-to adjust the water spray

or switch the water flow, when it is screwed to the tightest position, the water flow can be turned off.

This water gun nozzle is suitable for gardening,

household, industrial, agricultural and forestry

washing and irrigation water

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.