Type-c PD2/3.0 To DC 5.5*2.5mm DC5525 Trigger Cable QC4 Charger Notebook 15/20V Or 9V/12V Display Current And Voltage

Packing list * 1pcs PD3.0 trigger * 1pcs 1m USB to DC5.5 2.5mm cable Packing weight * 46g Products question: Q: Does this support my notebook? A: Support for the following points 1: Your notebook's charging power is le than or equal to 65W. 2: You have the right DC to transfer the charging port adapter of your notebook. 3: You have a PD power supply or mobile power supply with 65W or more output power.

PD3.0 protocol current voltage trigger Automatically store the current voltage model No:PD3.0-R

This products can support PD3.0 compatible 2.0 protocol. By sending PD protocol to PD charger or PD and other PD equment, it can trigger 5V/9V/12V/15V/20V quick charging voltage for various testing good or Bad quality , identification of voltage and current power.

== Instructions ==

Enter TYPE-C input male or female to your PD charger charging PD etc. If the PD protocol handshake is succeful, the OK light will light up. You can send the protocol voltage(Eg.5V/9V/12V/15V/20V) of different gears by clicking the on, long pre or double click. The PD protocol is sent in turn; the power-off can memorize the current voltage value and the turn-by-turn mode, and the next time the power is turned on, the last memory is loaded and loaded to facilitate high-volume testing and of the production, thereby improving production efficiency.

== Panel introduction ==

A/A1. Type-C Input (USB C input, PD charger or PD power supply)

B. OK! Light: This light is on, indicating that the PD protocol broadcast data is succefully received, and the protocol handshake is succeful.

C. Digital tube display,When the output is no load, only the voltage is displayed. When the output has load, the voltage and current are displayed in turn.

D. USB output (can be connected to the load)

E. V-function on, click to send voltage downshift protocol, double click or long pre is to send 20V-15V-12V-9V-5V PD trigger protocol in turn

​ F. Click to add the voltage to the protocol, double-click or long-pre to send the 5V-9V-12V-15V-20V PD trigger protocol in turn.

T 1: This time, the power-off memory function has been added to meet the purpose of fast simulation test of the production line in the ma production of fast-charge equment. That is, the measurement mode is memorized in the memory, and the memory data is called out next time. Automatically enter the same mode before, which can greatly shorten the test time reduction step and improve the production test efficiency T 2: This time added a special voltage memory function, that is, the voltage value that you manually adjust after power-off, the next time you re-energize the system will call the previously stored protocol and voltage data, intelligent automatic transmiion of the corresponding protocol activated or In the last storage of the same voltage value, the fast charge device can use the voltage value induced by the instrument as the power supply for other devices (of course, the adapter can be perfectly replaced when the total power is satisfied), so that idle idle Charging equment can also be used as an environmentally friendly application for other power sources. Identification PD charger voltage (5V9V12V15V20V)

​5V Trigger Voltage

​9V Trigger Voltage

12V Trigger Voltage

15V Trigger Voltage

20V Trigger Voltage

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.