Universal 433mhz 315MHZ E Control 4 Channel Garage Gate Door Opener E Control Duplicator Clone Cloning Code Car Key-315MHZ B

Notice:The e control can not copy with the Rolling codes

Type A

Specification:

The e control adopts SA901B main control ch, supports online programming, can be programmed repeatedly, built-in EEPROM, can copy other ordinary e controllers with the same frequency, can clear codes and learn codes at any time, easy and fast to use, can be used in car e control, light control, Smart home e control and other fields. Product features (1) Working frequency: 433 MHz / 315MHz (special frequency can be customized according to customer requirements); (2) Power supply scheme: DC3V (on battery 2032) power supply; (3) Standby current: le than 0.15uA; (4) Good selectivity and stray radiation suppreion ability; (5) Good local vibration suppreion ability; (6) Temperature range: -20-70℃, it can work normally even in harsh environmental temperature; (7) Product size: 60*37.4*11.4 (mm) (including shell); (8) Product weight: 14.39g (including shell). Function Descrtion (1) Copy code operation If the e control has cheed the code, the code must be cleared before the code can be cheed. Code matching operation: pre the single on of the copied e control and the copy e control at the same time, until the indicator of the copy e control fes from fast to steady on, you can release the two e control ons, and the code matching is succeful. The other keys are also operated in sequence according to this method until all keys are copied. (2) Clear code operation Pre and hold the lo and unlo ons of the copy e control at the same time until the indicator light fes 3 times, and then short pre the unlo on three times. The indicator light fes continuously to indicate the succe of the code clearing (the lo on is kept preed during this proce). (3) Recovery code operation Pre and hold the mute and ring ons of the copy e control at the same time until the indicator light fes quily, you can restore the e control code that was cleared before. Normal working voltage DC2.4V—3V Emiion current