US EU Plug GJ 8019 Portable Hot Air Gun Solder Blower LCD Display Rework Station Adjustable Heat Device With Temperature Control

US EU Plug GJ-8019 Portable Hot Air Gun Solder Blower LCD Display Rework Station Adjustable Heat Device With Temperature Control

Description:Products Features：1.Numerical control & Dial display2.Brushle fan 3.Constant temperature mode 4.Automtic mode5.Plug in and out mode 6.Portable machineWaring !!Use this machine,the following basic measures should abide ,avoid or cause injury or damage caused by fires.1.To ensure personal safety, after the machine completed work ,please unplug the power cord.2.You must use the or recommendation of the parts,otherwise it will lead to serious consequences.3.Failure machine must be repaired by profeionals.4. Hot air is open,its temperature are likely to reach 400℃.Do not use it near ,objects.Tube and the hot air are very hot,can the body,do not touch the hot and direct injection to heat the human body.5.Hot air gun is turned on ,do not leave the jobs site.6.When the hot air gun is opening,do not install nozzle,the heat and the nozzle must be cooling,then install the other nozzle.7.Please keep inlet and outlet air flow ,don’t have obstruction.8.After used,remember to cool the body,the machine should be put into the frame,then shut down and go to sleep.9.Should be handled with care,Do not e strong ion.10.The machine welding will take e,please do proper ventilation.Ⅰ.Products Features1.Numerical control & Dial display:With closed loop sensor and high power,the temperature controlled by PWM and LCD dial display which lead to steady and accurate temperature.It can adapt to a variety of purposes.2.Brushle fan :Brushle fan inside lead to air flow adjusted,wind gentle，long life motor & low noise3.Constant temperature mode:The temperature is accuracy and stability,without the wind effect.4.Automtic mode:There is a sensor in the machine ,the system enters the work-mode(heat-blow air-e temperature constant) as long as you pick up the machine,and it enters the standby- mode(stop heating--cooling down --delay to sleep) when it is put back to the frame.prolonged heating element life and protect hot air gun.It is easy to use.5.Plug in and out mode:Heating element interface is connector ,and is easy repd.6.Portable machine: Small size & light.Product weight: 0.439 kgPackage weight: 0.647 kgProduct size (L x W x H): about 28.00 x 4.00 x 4.00 cm / 11.02 x 1.57 x 1.57 inchesPackage size (L x W x H): 33.00 x 13.50 x 10.00 cm / 12.99 x 5.31 x 3.94 inchesList:1 x GJ - 8019LCD Hot Air Gun4 x Nozzle1 x Bracket1 x Bilingual Manual in English8018：Features:1. With atctive appearance, easy to carry.2. With the use of high-quality heating elements, even heat , LCD display, dial constant temperature.Scope of application:1. Can be used to weld IC of SOP and QFP models.2. Applicable to tin and sealing-off for most surface-mounted parts.3. Applicable for various shielding boxes and covers on circuit board , heat shrinkable tube, PVC film and polyethylene used for metal connection.Specification :1. Input voltage (v):  EU plug: AC 2202. Temperature range (℃):