VL53L0X TimeofFlight Distance Sensor VL53L0XV2 Module

Detailed Information About The Product:

VL53L0X Time-of-Flight Distance Sensor Breakout -VL53L0XV2 Module for ; The VL53L0X is a time-of-flight ranging system integrated into a module. This board is a for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet 1MB pdf) using this product.

The VL53L0 uses technology to precisely measure how long it takes for emitted pulses of infrared laser-light to reach the nearest object and be reflected back to a detector, so it can be considered a , -contained lidar system. This time-of-flight TOF) measurement enables it to accurately determine the absolute distance to a without the object's reflectance greatly influencing the measurement. The sensor can report distances of up to 2 m 6.6 ft) with 1 mm resolution, effective range and accuracy noise) heavily on conditions and characteristics like reflectance and size, as as the sensor configuration. The sensor's accuracy is specified to range from /-3% at best to over /-10% in less optimal conditions.)

Ranging measurements are available through the sensor's I²C TWI) interface, which is also used to configure sensor , and the sensor provides two additional pins: a shutdown input and an interrupt output.

The VL53L0X is a great IC, small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for Minicontrollers operating at 3.3 V or 5 V. breakout board addresses these issues, making it easier to started using the sensor, while the overall size as small as possible.

PIN Description Regulated 2.8 V output. 150 mA is available to power external components. If you to bypass the internal regulator, you can use this pin as a 2.8 V input with VIN disconnected.)

VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.

GND The ground 0 V) connection for your power supply. Your I²C control source must also share a common ground with this board.

SDA Level-shifted I²C data line: HIGH is VIN, LOW is 0 V

SCL Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V

XSHUT This pin is an active-low shutdown input; the board pulls it up to to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted. Color: purple

material: plastic

Package includes : 1 x -VL53L0XV2V L53L0X Time-of-Flight Distance Sensor

Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is /- 1-3cm.

About Us

We provide the good product with the best price,we support Wholesale/Drop Shipping Order

1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.

2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments

1.We will send out the orders ASAP once your payment is completed normally.

2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service

We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback

1. Please check the package and item when you get carefully to make sure there is no problem.

2. If you have any problem or are not entirely satisfied with your package,please dont be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.

3. If there is no problem, please leave us five star positive feedback.

Your affirmation is our greatest motivation ! ! !

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.