Waterproof 85mm meter COG 0~35MPH 0~55KM H for Motorcycle Total Mileage 12V 24V Speed

35/60/80MPH 0-55/95/130km/h meter Car Motorcycle Universal 85mm with 9-32V for Marine Boat

Specification:

-Fixing dimension: 85mm(3-3/8")-Indicating Range: 0-35MPH/0-60MPH/0-80MPH-Working Voltage: 12V/24V- Mileage Range: 0-99999.9miles- Blind Area Compensation-OverSpeed Alarm-Working temperatures: - 40 to 85°C-Operation mode: LCD display, ster motor

Features:

-Suitable for all vehicles and off-road vehicles-The signal comes directly from the signal receiver( ), don't need other speed r.-The has the advantages of high precision, quilocation confirmation and short start up time.-67 waterproof and dustproof grade-Re polarity protection and anti-foing performance-No Stationery Drift-Ster motors used for full range of sting s, great feature with its le power consumption, longer life, higher precision, etc.

Instrustion:

1. Cut an 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16”) behind the panel to fit the .2. Remove fastening ring (I), insert through the panel from the front. Tighten (III) using fastening ring (I) from the rear.3. Connect cables according to the diagram. Choose either red or yellow wire for backlighting.4. Securely fasten the , preferably outdoors (or inside front windscreen) so that it has a clear view of the sky to piup signal. Connect the cable to socket in the baof the . Do not cut cable.5. Ar turning on the power, allow the to search for signal for 1 minute.Function Select： “ODO”，“BUZZ”Pre and hold on the on at the back, then turn on the power supply.The LCD will show ODO, BUZZ, etc.You can select the function ar releasing the on.Note: Ar setting, you should disconnect both Power+ and GND, then reconnect the two cables , it will save the setting. If you just cut Power +, then it won’t work properly.

Package:

1x meter1x 1x Multi-plug socket1x External on1x Installation Instruction