Waterproof Dive Metal Detector Folding Version Pulse Coil Underwater Pulse Scan Pinpointer Q20 Scuba Detecting

Scuba Metal Detector Folding Version Pulse Coil 60m Underwater Pulse Scan Pinpointer Diving Detecting

SHRXY DIVE Q20

Designed for those who breakthrough the boundaries and redefine the underwater adventure, the SHRXY DIVE Pro is by far the most versatile and portable underwater metal detector we ever made. With a foldable coil Fixture, Scalable handle, and the powerful pulse induction system, the DIVE PRO is the ultimate detector for beach or underwater.It is the upgraded version of the SHRXY dive detector. The oversized 10 x 4 inch coil allows the device to perform at its best underwater and on land.

============================================================================ NEWEST version SHRXY DIVE DETECTOR

Is unlike any other pointer on the market. Using the circuit inside the SHRXY dive detector housing.  has excellent proportional response, selectable beeper and/or , More robust LED light, lanyard loops, longer time battery operation, and a waterproof housing make the SHRXY Dive detector the most excellent pointer on the market.

Please use a new 9V constant voltage battery or , and do not put it on the table or floor when using it. Keep away from metal objects more than 0.5 meters.

mode                  SHRXY DIVE PRO Q20

Depth:                 Submersible to 60m/200'

Working Method:        Pulse Induction

Operating Frequency:    95kHz

Tuning:                Automatic or manually (retune)

Indicators:              Audio / Vibration / LED

Temperature range      5° to 158°F (-15° to +70°C)

Target indication:        Beeper, (selectable)

Target response:         Static

Coil:                  10"x4" / 25.4x10.3cm

Weight:                300g/10.5 oz (no battery)

Size:                  After folding: L:25.5cm, M:10.3cm, H:6cm

Unfolded:   L:46.5cm,

Batteries :            9V, alkaline or (default Not included)

Battery lire:           20 hours tyal

Warranty :            1years

1 x GP-Hand Held Metal Detector 1 x User Manual 1 x mesh bag 1 x SET screw acceories 1 x Anti-lost let (umbrella rope) NOTE: 1. Metal detectors can detect most metals, but not all! This is related to the resistance and electromagnetic properties of the metal, and the surface area of the metal. For example, K gold and pure 304 steel cannot be detected. This is a physical property and does not affect the use of metal detectors. Some K gold chains cannot be detected. relevant knowledge it can be inquired, and this is not a product use problem. 2.After use in sea water, soak or rinse in fresh water and dry. The coil is filled with resin, fully enclosed, and a protective cover is installed, there will be a small amount of water in the gap, just dry it, and it will not affect the use. We reject disputes on this ground. 3. we to do the further escalation, the performance has been greatly improved, In the battery compartment, we add a paper str seal,in order to prevent the buyer himself to disaemble the product, can not work,Avoid disputes. Please don't try to open it,If you open it,After problem. Responsible by the buyer!!!

PLEASE READ CAREFULLY BEFORE DETECTING

• This metal detector is waterproof up to 60M/200FT, it can be immersed in 60M/200FT water for 30 minutes, and the best water depth is within 15 meters for long-time working.

• Before powering on the SHRXY DIVE Pro, make sure the angle between handle and coil is larger than 90 degrees, to avoid coil interference. Please do not turn on the device when the coil is folded

• Please do not pull on the coil cable. The casing of the device where the cable is connected is filled with resin, please do not worry about water leakage. When the cable blocks the connecting shaft, please adjust it to the position.

• Install the anchor ring and attach the lanyard to not lose the detector, especially while detecting under water.

• Make sure the battery cap thread and O rings are free of dust, mud, sediment, etc. Always remember to keep

the end cap thread and O-rings Lubricated with silicone grease to maintain a tight seal.

• Before searching under water or cleaning the detector, make sure that the battery cap is secured tightly, so that no water can get in.

• Always wash your detector in fresh water after each dive. Do not use any cleaners and soents for

cleaning and/or for any other purpose. We or air the detector dry thoroughly before storing or charging.

• When storing for a long time, please remove the battery inside the device.

• Do not store the detector under extremely low or high temperature for extended periods. (Storage Temperature: -20 to 60 °C)

If you need special battery for SHRXY metal detector, please click the photo below.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.