Waveshare 1.3 Inch LCD Display for Raspberry Pi Pico, IPS Screen Display Module, 65K RGB Colors, 240X240 Pixels

1.3inch LCD Display Module For Raspberry Pi PicoEmbedded ST7789 Driver, Using BusFor Raspberry Pi Pico Header CompatibilityOnboard Female Pin Header For Direct Attaching To Raspberry Pi Pico1x And 4x User ons For Easy InteractingOperating voltage: 2.6~5.5VResolution: 240x240 pixelsCommunication interface: 4-wire Display size: 23.40 x 23.40mmDisplay panel: IPxel size: 0.0975 x 0.0975mmDriver: ST7789Dimensions: 52.00 x 26.50mmLCD and the controllerThe ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. Theresolution of this LCD is 240(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn't use all the RAM of the controller.This LCD accepts 8-bits/9-bits/16-bits/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565.This LCD uses a 4-line interface for reducing GPIO and fast speed.LCDNote: Raspberry Pi Pico is NOT included.color:BlueMaterial:Package Contents:1 x Pico-LCD-1.3Only the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.