WIFI Mobile Phone APP Cycle On-off Time Controller Intermittent Uninterrupted On-off Timer Time-controlled Switch

WIFI mobile phone APP cycle on-off time controller intermittent uninterrupted on-off timer time-controlled switch

Package will include:

1 pcs wifi timer

Application examples:

The controller is installed in a store in Beijing to control the advertising lights. People traveling to Shanghai city can use the mobile phone APP to turn on or off the advertising lights, or set it to turn on at 9 am and turn off at 6 pm every day to implement the remote control function.

Function description:

1. Switch control: the remote mobile phone APP controls the output on and off, and the switch status can be fed back to the APP inter

2.Time control switch: Corresponding to the 24-hour time control in Beijing time, such as street lights, turn off at 6 am and turn on at 6 pm, and can be set to repeat on a weekly basis.

3. Timing switch: Turn on or off according to the set time. The range can be N days, N hours, N minutes. For example, set it to turn off after charging for 1 hour.

4. Circulation control: keep on and off the cycle according to the set switch. The range is N hours and N minutes, such as the exhaust fan, turn on for 1 hour and turn off for 1 hour.

5. The output status can be customized when power-on, including power-on on, power-off, and power-on hold.

6. It can be controlled by the official account, add the "eWelink" official account, enter and follow the inter prompts to operate.

7. It can be shared to a friend for control, and the friend can be shared after registering an E-Welink account.

8. A mobile APP can support up to 80 hardware control switches.

Note when setting: Time control can be set up to 8 groups, including time control, timing, and cycle functions.

Setup process:

1. Download the "eWelink" mobile app

1. For Android phones, search for "eWelink" in major application markets or Baidu to download the APP.

2. On the mobile phone, search for “eWeLink”APP store to install the APP.

2. Schematic diagram of equipment installation

This modified part needs zero live wire to supply power, connect the wire according to the wiring diagram.

Third, the process of adding a device to the mobile APP

1. After installation, power on the modified parts. At this time, the configuration indicator flashes, wait 10 seconds, and the device initialization is complete.

2. Long press the black button for 5-7 seconds until the configuration light flashes quickly, at which time the device enters the hotspot configuration mode.

3. Click the "+" device iconAPP, and click Next.

4. You are prompted to select a wifi that can normally access the Internet and enter a password, confirm the password is entered correctly, and click Next.

4.1 The latest version of the APP already supports Chinese wifi names, please upgrade to the latest version.

4.2 If your home WiFi does not require a password, just leave it blank.

4.3 The device uses 2.4G wifi communication protocol and does not support 5G network at the moment.

4.4 If your network has been set to hide or filter the MAC address, please ask the network administrator to enter the background to modify the settings, and then add the device.

5. The APP starts to search and automatically switches to the device hotspot (ITEAD-xxxxxx). After registration, it automatically skips to the next step.

6. Rename the device. After confirming, complete the equipment adding process.

7. If the device is not online at this time, please wait for two minutes. The device is trying to connect to the cloud server through your wireless router. When the configuration indicator turns to steady on, it means that the device is successfully connected and can be controlled remotely. If the display is offline for a long time, please refer to the description of common problem solutions.

If the configuration is off-line, please re-power on the module to resume online