WiiYii P11 OBD2 GPS Auto HUD Display Car Meter Turbo Boost Temp Eletronicos

WiiYii P11OBD2 GPS Auto Acceoires HUD Display Car meter Turbo Boost Temp Eletronicos Gauge Code Reader Car projetor

Functions Abbreviations:

ECT - Engine Coolant Temperature

RPM - Revolutions Per Minute

DIS - Driving Distance

A/F - Air-fuel Ratio

RTC - Real-Time Clock

TPS - Throttle

GPS - GPS numbers

VLT - Voltage

TIM - Local time

MAP - Intake Preure

TCP - Turbine Preure

ALS - Altitude

IAT - intake temperature

FUE - Fuel Consumption

MIN-Driving time

OIT - Oil Temperature

PSI - Turbine Preure

DIR-driving direction

ELD - engine load

P11 HEAD UP DISPLAYNew GPS+OBD FOR ALL CAR9display interfacesMultle function combination switching

1 OMain interface 1 2 speed + compa 3 main interface 2

4 Turbine preure gaugeO 5 main interface 3 6 six grid interface

7 Speedup test 8 brake test 9 read whole vehicle data

Functions OptionSetting page,Easy to understandIncluding all HUD functions

Speed RPM water temperature voltage clock

driving time driving distance fuel consumption altitude numbers

driving direction intake air temperature Engine load Speed up test Brake test

oil temperature turbo preure air-fuel ratio intake preure throttle

Auto brightnes Kilometer/ Mile switch Data stream OBD system GPS system

Multi alarms

Speed Alarm RPM Alarm Voltage Alarm Water temperature Alarm Engine fai

Read the entire vehicle ECU dataRead the data in the vehicle's on-board computer (ECU) with OBD standard through the automobile OBD interface, after data proceing, provide the driver with practical data informationDual mode dual systemOBD+GPSDual mode, OBD data + GPS data can be displayed at the same time, GPS data is applicable to all models and hardware upgradeIndependent research and development, using Taiwan's core and hardware powerful chs, compatible with all models8 interface colors to chooseFreely match more than 100 small interfacesAdopted Al ch, intelligent reminderSpeed color will change as different speedDTCSSTATCar data scanning,MILDISTANCEDepth detection diagnosisRead the entire carstream, Do a comprehensive al checkup foryour carOBD2 FAQ:

1.No functionis displayed,no power

Check whether the OBD cableis tightconnection,pull down repeatedly to confirm,please try it on another car if still not workable,ysis if it is an error from OBD interface,if yes,please repair it and connect the deviceagain.

2.Only the car voltage displays and be automatic power off after 30 second

(1) This product is only available for OBDII and EOBD cars when it is in OBD2 mode

(2) This product OBD2 mode does not support OBD I and JOBD

(3) OBD2 is a car protocol(U.S.A Cars:2003 Other regions:2007)

(4) Switch to the GPS system using the USB cable to display, within 5 seconds of power Pull rightthe on to select the GPS system.

3.The vehicle speed on HUD is not as same as meter’s

(1) Please check that the unit is correct KM/mile MPH, (speed unit switch please refer to the settings)

(2) Vertical long preinto the system settings, pull right the on to select the speed adjustment menu,and make a fine-tuning (e.g. meter displays 100 Km/h,device shows 105Km/h,use default value 107-5=102 ).

4. There is an error on fuel consumption

(1) Checkingyour cardisplacementand make sure that theengine displacement of the device is aame as your car’s(e.g. car is 2.0L,please set parameter value to 2.0L)

(2) if the displacement is the same,you can also do afine-tuning settings(e.g. equment fuel ishigher than 0.2L,please set the parameterto 98%)Recommended: fine-tuning isoptional sinceitis a realdatafrom car computer

5.The device cannot auto power off

Adjust the sleep voltage to 13.2V or 13.6V, then HUD will power off in 3 minutes.

6.Auto start-stop cars

Adjust the shutdown voltage setting in the system settings to the COM mode

7. Automatic start-up will auto off when step the brake and same situation on Hybrid car in the traffic.

(1) Setting to COM mode(in the menu of shutdown voltage)

(2) Setting shutdown delay to 300 seconds,so that it can turn off after 5 minutes

(3) Please switch to the GPS system(Dial up the scroll wheelwithin 5s)

8.Wrong operation lead to cr

(1)Does the OBD2 interface use other OBD equment (position, tire preure monitoring, drop lock, lift window folding, ELM27)

(2)Modified and retrofitted (central control electronic throttle accelerator fixed speed cruise brushed computer system

(3)One-key start, keyle entry, e start) will cause cr, unplug other OBD devices and use the product directly, to restore factory settings (see the setting table for details)

(4)Pre and hold the scroll wheel to enter the setup menu, right-click the scroll wheel to switch to system settings, pre the scroll wheel vertically to enter the system settings, right-click the scroll wheel to switch to factory settings, and pre the scroll wheel vertically to confirm.

(5)If you haven't soed it, please switch to GPS system and use USB cable for display. Turn on the power and turn the dial for 5 seconds to select the GPS system.

GPS FAQ;

1.The screen without any display,and no power

Start the car engine;check if the cable line is tight;or connect the USB to the computer to check

2.Without car Speed

After HUD power-on, the GPS will start to find the . Please drive the car to the road. It will work once gets more than 5 signals.

3. Cannot be turned on automatically or repeatedly extinguished during driving

Please use the USB cable to insert the ette

If you use the OBD cable, change the sleep voltage to 13.0V or 12.8V

If use the USB cable, make the sleep voltage off.

4.Inaccurate time

Enter the setting it: system time adjustment, turn the dial to the right to adjust the time zone time, after adjusting, pre the dial vertically shortly for 2 seconds to save and exit

5.Speed is not correct

(1) If the unit is correct,km KM/mile MPH, (speed unit switch reference settings item)

(2) The car factory had increased speed(5-7%)than real for drivers’ safety, data is strictly follow the international standards

(3) Fine-tuning the vehicle speed, e.g. meter display 100 Km/h, hine display 105Km/h,default value 107-5=102

6.Driving direction display error

After the vehicle speed exceeds 5KM/H, the direction can be displayed normally.

7.Speed is still on display after the car stops

drift will be caused in underground parking,tunnel,overpa or blockers,please drive your car on open road,then this situation can be soed after the numbers >5

8.HUD cannot be automatically shut down after carstopped

(1) HUD can be shut down in 3 minutes(in OBD mode)

(2) If not in5 minutes,set item shutdownvoltageto 13.5V or use the USB cable

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.