Wireless e Control Light Switch 110V 220V 16A in Wall Box,2 Way Control,Mini 433Mhz Module,50m nsmitter,Timing Function

Wireless e Control Light Switch 110V 220V 16A in Wall Box,2 Way Control,Mini 433Mhz Module,50m nsmitter,Timing Function







▶

●Receiver Module:

Working voltage : AC 85V~250V

Max current : 16A

Max load : 3200W

RF frequency : 433MHz

Working temperature : -30~+80 degrees celsius

Receiving Sensitivity : >-97dbm

Amount of storage e controls : about 20 pieces

Support en : 1527 Leaning code

RF Operating mode : ASK rheterodyne wireless reception

Receiving range : Open space is more than 150 meters

Size :42*42*20mm

Weight :31g



●Mini e controller:

Features: Small size, can be pasted anywhere

: 1527 oblique code

RF frequency: 433MHz

Size: 50*50*13 mm.

Battery: CR2016*2 included

Double-sided tape: included

Control distance: 50 meters open space

  





▶Mini High Power Receiver Module



●Mini body:

The small-sized receiver is suitable for more scenarios and can be installed in the manual control switch bottom box, ing maintenance and installation more convenient.

●16A High Power:

It can carry 16A high current and can be used for high-power lamps/appliances with confidence.Safe to use.

●Support 2-way control:

This switch can be directly connected to your lamps, or you can connect the 1-way and 2-way manual control switches after connecting the lamps. After installation, you can control your lights ely, and you can still control your lights with the manual control switch.

●433mhz Wireless e Control:

The signal is stable and can penete walls.

●Timing function delay light off mode:

Just press the e control to set, no need to set up through the receiver, which is more convenient.

Three-level timing function, 5/10/15 minutes.

●Suport Flexible Pairing:

No interference to use several in the same room,One receiver can be controlled by multe e controls.



▶Mini e controller

●Mini size

Small size, comes with double-sided tape, can be pasted anywhere

●Low power consumption and service life

The panel switch key life is 100,000 times. This switch is very energy efficient. Using 2pcs CR2016 batteries included, it can be used normally for more than 7000 times.

●Signal is stable

The indoor environment can reach 20 meters, and the outdoor open environment can reach 50 meters.




Details

●16A High Power:

It can carry 16A high current and can be used for high-power lamps/appliances with confidence.Safe to use.







●Support 2-way control:

This switch can be directly connected to your lamps, or you can connect the 1-way and 2-way manual control switches after connecting the lamps. After installation, you can control your lights ely, and you can still control your lights with the manual control switch.





Note:

This module is suitable for connecting the rocker switchand is not suitable for momentary rocker switch and touch-type switch

●Timing function delay light off mode:

Just press the e control to set, no need to set up through the receiver, which is more convenient.

Three-level timing function, 5/10/15 minutes.







●Suport Flexible Pairing:

No interference to use several in the same room,One receiver can be controlled by multe e controls.







●Signal is stable

The indoor environment can reach 20 meters, and the outdoor open environment can reach 50 meters.

●Low power consumption and service life

The panel switch key life is 100,000 times. This switch is very energy efficient. Using 2 CR2016 batteries included, it can be used normally for more than 7000 times.

 




Set up



▶Tole Mode:

1. Clithe on on the e, relay will turn on;

2. Clithe same on again, this relay will turn off.

Set up

1. Clithe learning onon the receiver 2 times . Wait for 3 seconds;

2. Clithe on on the e. Succeed.



▶Timing function delay light off mode::

After clicking the wireless e control switch on to open the light, the light will automatically turn off after 5/10/15 minutes.

Set up

Press and hold the wireless e control switch on until the light fes 1/3/6 times.



▶ Reset :

Clithe learning on on the receiver 8 times . succeed.



Notice:

1. After reset, all the e controls cannot work anymore.

2. Rep the battery in time when the e control voltageis low. To get the stronger signal nsmission.

 


 

Questions and Answers



1.Can this module work with my own nsmitter?The frequency are same!

Not only the frequency sir.The code should be same too.Our mini controller can get 2262 fixed or 1527 learning code.



2.How many can control this module?

One module can be controlled by almost 20pcs nsmitters.But the controller can only catch one signal once.So if you press more than 1e on at the same time,there will no response.



3.Can I use wall switch and to control this mini module at the same time?

Of course sir.Just set up with wall switches and .They both can control this module.



4.Does this mini module have wifi function?

Sorry sir.It is RF433mhz only.We have WiFi+RF function module in our store too.



5.Do you have a wholes price?

Of course sir.Please contact with us,we wilive you the best price.

▶Please contact with us if you have any questions.Thank you.   

▶We have own factory,if you want to do ODM OEM bussiness,please contact with us.