XL6009 Step-up Boost Module Power Supply DC-DC 4.5-32V To 5-35V LED Digital Voltage Meter Adjustable Boost Module

XL6009 Step-up Boost Module Power Supply DC-DC 4.5-32V To 5-35V LED Digital Voltage Meter Adjustable Boost Module

Specifications:

1. Input voltage 3V 32V (boosting below 5V works normally, but the digital tube does not work), the best working voltage range is 5-32V; output voltage 5V-35V;

2. The maximum input current is 4A, no-load 18mA; the higher the voltage, the greater the no-load current;

3. Non-isolated boost, non-synchronous rectification;

4. Ultra-high switching frequency of 400KHz, you can use a small-capacity filter to achieve very good results, with smaller rple and smaller size;

5. With power indicator

6. With display and the can be manually calibrated. The error of the is ±0.05V, and the range is 0~35V. (Note: To ensure the accuracy of the , please ensure that the input voltage is above 4.5V)

7. Touch the on to switch between measuring input or output voltage, and there is an indicator light to show which voltage is being measured, and save the settings, even if the power is turned off and on again;.

8. The can be turned off, just touch the on when it is not needed to display;

9. With overheat protection and short circuit protection functions;

10. IN+: Input positive

IN-: Input negative.

OUT+: output positive

OUT-: output negative

11. Rotating voltage potentiometer, adjustable output voltage; output voltage must be greater than input voltage;

Calibration Method of Onboard :

1. When the on-board displays the output voltage, pre and hold the on on the right for 2 seconds and then release it. The and the output voltage indicator "OUT" will f simultaneously, and the output voltage adjustment mode will be entered; for the same reason, display on the When inputting voltage, pre and hold the on on the right for 2 seconds and then release, the and input voltage indicator "IN" f simultaneously, and then enter the input voltage adjustment mode;

2. Tap the right on to increase the voltage by one unit, and tap the left on to decrease the voltage--unit; since the voltage value of a unit is le than 0.1V, you need to pre it 1-5 times to see When the has changed by 0.1V, the specific number of consecutive keystrokes depends on the current displayed voltage value. The higher the current displayed voltage, the fewer the number of prees;

3. After the voltage adjustment is completed, pre and hold the right on for 2 seconds and then release it. At this time, you can exit the voltage calibration mode, and all parameter settings will be automatically saved after power-off.

Package Included:

1 * XL6009 DC-DC Adjustable Digital Display Booster Board 4.5-32V to 5-35V Red Display

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.