XL6009 XL6019 DC 5-32V To DC 1.2-35V Adjustable Step Up Down Module Boost Buck Converter Power Supply Module High Performance

Difference between XL6019 and XL6009: XL6019 is an upgraded version of XL6009, with similar functions and more stable performance. Introduction 1: The new XLSEMI ch, eliminate , disaemble ch. 2: ed SMD electrolytic s, not accompanied by homemade capacitance. 3: Up to 400Khz operating frequency, and LC filter circuit, output rple is very low. 4: TDK inductors, the heat and noise to a minimum. 6: Input and output three MLCC Multilayer ceramic s, interference enhance stability. 7: use kb of A grade sheet material, to prevent cardboard, gage plate. 8: Built-in MOSFET, the LM2577 built-triode say goodbye, can reach 94% efficiency. 9: Increased enable the port, you can control whether the boost circuit. 10: Dimensions: 49 (L) * 23.4 (W) * 11.4 (H) mm (excluding potentiometer) Parameters Module Properties: non-isolated step-up & down module (BOOST & Buck) Input voltage: 5-32V Output voltage: (1) continuously adjustable (1.2-35V) Output Current: 1.5A (MAX) Input Current: 4A (MAX) Output power: natural cooling 20W, plus heat sink 25W (MAX) real power Maximum output power = input voltage conversion efficiency * 4A *conversion efficiency Conversion efficiency: the efficiency of the measured voltage and current commonly used (hereinafter, for reference only) A=Input voltage. B=Input Current. C=Output voltage. D=Output Current. E=conversion efficiency Operating temperature: Industrial grade (-40 C to + 85 C) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat diation) Full load temperature rise: 45 C Operating frequency: 400khz Load current: 5V turn 12V 15mA Load regulation: ± 0.5% Voltage regulation: ± 0.5% Dynamic response speed: 5% 200uS Enable Control Port: Yes, high 1.4V-VIN (ON), low 0-0.8V (OFF), the default high Short circuit protection: None (Please install fuse or protection circuit input) Input re polarity protection: None, please with our re protection diode board or in the input series. Installation: You can screw (Fixing holes 3 mm), 2 fixing holes About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.