YLY-2088 400W Speaker Frequency Adjustable 2 Way Crossover Filters 1 Unit Audio Speaker Frequency Full Range

YLY-2088 400W Adjustable 2 Way Croover Filters Module Audio Speaker Frequency Full Range Ba Welding FreeFeature:1. Versatile:Our frequency is multi-purpose and fully adjustable, ing it easy to use without any . It can be used for high-frequency + low-frequency two-way speakers, 2.1- high-frequency boxes and car full-range speakers, or even single high-frequency or single low-frequency. It allows for 4-16 impedance speakers and supports up to 400W of power.2. High-Quality Components:The frequency features pure copper jumpers with ABCD four positions and comes with four plug caps. It uses high-quality copper wire inductors, s, and sockets, and a fibergla circuit board. The high-frequency settings include weak/medium/strong, while the low-frequency settings include full sound/low sound/strong ba/medium sound.3. Profeional Technology:The frequency is made using profeional point- technology, with evenly sized and fully filled solder joints that shine brightly.4. High-Quality Copper Wire Inductors:The frequency uses 0.8mm oxygen-free copper wire to wind pure copper wire inductors, and includes a 100uF large-capacity . It has a connection socket for easy wiring using a small screwdriver, and provides multe combinations of 6dB circuits, allowing for various different croover frequencies.5. Reasonable Design:The frequency has a reasonable design, an exquisite appearance, and superior sound quality. Users can easily adjust the sound according to their own preferences.Specification:Model: YLY-2088Frequency point: not located, determined by debuingPower: 400WImpedance: 4-16 sMaterial: The inductor is wound with oxygen free copper, with a pure copper wire diameter of 08. Super large capacity , reasonable design, exquisite appearance, and comprehensive control of sound quality.Size: 7x5x2.5cm/2.75x1.96x0.98inchWeight: 75gInstructions for use:High and low split frequency wiring:Input: Connect to the power amplifier or rear junction box;: Connected to a tweeter;B: Connected to the ba speaker.Wiring base twisting operation:Use a small slotted screwdriver to loosen in a counterclockwise direction, slide the compreion plate down, peel and insert the wire, and tighten clockwise.Full frequency coaxial connection method:Connect the speaker to the B/ba position, and then find a small wire to connect from the positive pole of the ba to the positive pole of the tweeter.Warm Tips:The manual tightening force will be stronger than the fixed feet of the wiring base to avoid deformation. When tightening, use your fingers to pinch the wiring base to tighten it. In case the compreion plate cannot be tightened due to g too loose, turn the frequency upside down, screw in the compreion plate, and then return to the wiring.

Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x Speaker Frequency