YMT Steering Stabilizer Tie Rod Clamp for JK TJ XJ ZJ MJ 2007~2018 with 1~3 8in Diameter Tie Rod 1~3 8" OD Tube

Steering Stabilizer Tie Rod Clamp for JK TJ XJ ZJ MJ 2007-2018 with 1-3/8in Diameter Tie Rod (1-3/8" OD tube)

ProductFeature:

【GREAT FITMENT】:Designed to mount factory and armarket style steering stabilizers utilizing a 1/2" mounting bolt and has a 5/8" mounting hole. Perfectly fit for JK (2007-2018) Tie Rod, for Factory JK Tie Rod, for TJ/XJ/ZJ/MJ Drag Link. Rep part number: #4050-38.

【PLEASE NOTE THAT】:These are for steering stabilizers only and are not intended for use with the hydro aist. Some late model compatible with JK (2011+) factory stabilizers will require the inner bushing sleeve to be ed out to 1/2" for compatibility.

【EASY TO INSTALL】:Can be finished installation in a few minutes, it is very easy and simple. 100% bolt on components aures an easy, trouble with the use of basic hand tools.

【EXCELLENT MATERIAL】:hined from high standard quality heavy duty steel with impact resistance, excellent solid and ble. Zinc plated for maximum corrosion and rust resistance for providing a reliable long-term service.

【100% SATISTIED GUARANTEE】:Aiming to give our customers the best products and services, we provide friendly 1-year's warranty support and easy-to-reach Customer Service to e sure your investment!

If your old stabilizer mounting bracket has taken a beating off road and has signs of rorash / wear or even broken, this is a great option for you! Our rounded clamp allows you to skid and slide over the obstacle which prevents bent tie rods and worn ball joints. Increasing the lifespan of your steering components with this simple upgrade.

Steel made, Zinc plating allows it to hold up to corrosion, quality meet or even exceed OEM specification.

Designed to mount any steering stabilizer utilizing a 1/2" mounting bolt to a 1-3/8" diameter tie rod or drag link.

Upgrade your Steering Stabilizer. This clamp has 50% more clamping force to truly secure your stabilizer to the tie rod.

PLEASE NOTE THAT:These are for steering stabilizers only and are not intended for use with the hydro aist. Some late model compatible with JK (2011+) factory stabilizers will require the inner bushing sleeve to be ed out to 1/2" for compatibility.

INSTALLATION:

1.Verify correct location for the clamp on the tie rod by cycling the steering full loboth directions and extending and collapsing steering stabilizer.

2. Install tie rod clamp on the tie rod with the ½" mounting hole towards the steering stabilizer.

3. Attach the end of the steering stabilizer to the tie rod clamp using the provide;frac12;" bolt with a washer on top (and bottom if neceary).

4. Install all 6 socket head bolts into bottom half of clamp.

5. Verify clamp and stabilizer are rotated into the correct position.

6. Torque the socket head bolts to 15 lb-ft.

7. Torque ½ inch mounting bolt to 50 lb-ft.

8. Cycle steering loto loto e sure there is no interference.

9. Chebolt torques ar approximately 100 mile