YS-XPSM 150W*2 TDA7498E Stereo B Adjustment Bluetooth5.0 Audio Power Amplifier Board Module Dual Heat Sink APP

YS-XPS High-power Audio Module 2x150W TDA7498E 2.0 Dual Stereo Bluetooth-compatible 5.0 DIY Home Audio ModificationFeature:1. Audio Amplification:The TDA7498E chip provides high-quality sound amplification with low distortion and noise levels, ensuring stability and clarity even at high power output.2. Multe Protection Measures:The chip comes with various protective measures such as overheating protection, under-voltage protection, and short-circuit protection, safeguarding the system against damage and malfunction.3. Bluetooth-compatible 5.0 Connectivity:With a nsmiion range of up to 15 meters (bstructed), the product supports stereo output with an output power of 150W*2 (left and right s) and delivers pure audio quality with clear , warm midrange, and powerful ba.4. High-end Volume Control Knob:The main knob uses a high-end rotary that achieves 360-degree infinite adjustment, allowing you to adjust the volume smoothly and easily. The VOL knob adjusts the overall volume, turning right increases it while turning left decreases it, and the one-on startup/shutdown adds to the convenience.5. Enhanced Cooling System:The product a large-area heat sink (463715mm) attached with special thermal silicon paste for efficient heat diipation. The copper-clad heat diipation area is doubled, ensuring high-performance operation and preventing overheating iues. The product can be connected to various devices, including smartphones, tablets, laptops, MP3 players, TVs, and both paive and active speakers.Specification:Certification: CEOrigin: Mainland ChinaProduct model: YS-XPSBluetooth-compatible version: 5.0 (bstructed, 15 meters)Input method: AUX+Bluetooth-compatibleNumber of s: 2.0 s (left +right )Adapted power supply: DC12~32V (undervoltage protection below 9V, can also support 12V power supply)Adapted speaker: 30-200w, 4-8 sOutput power: left and right s ≤ 150WProtection mechanism: anti re connection, undervoltage, overheating, overcurrent, short circuit protectionProduct size: About 110x58x25mm/4.33x2.28x0.98inchProduct weight: net weight 110gReminder:Only when the audio signal input is large enough and the power supply voltage/current is large enough can there be sufficient output power!The higher the power supply voltage, the greater the output power, the smaller the horn impedance, and the greater the output power!Please ensure that the power of the adapter power supply is greater than the actual working power of the amplifier!How to choose a speaker?Regarding the type of speaker: Commonly used speakers are generally 4-8 s, and can be used with left and right speakers. Full frequency speakers to high frequency speakers need to be connected, with a power range of 30W-200W. If your speaker has a low power, such as between 20W-50W, it can also be used. You need to reduce the power supply voltage to prevent ing the speaker when it is loud, such as choosing a power supply below 15V. The higher the selected voltage, the greater the sound or power that can be output. The speaker power should not exceed 200W, otherwise it will affect the sound quality.How to adjust the total volume?The VOL knob adjusts the total volume. The total volume of right-handed rotation increases, while the total volume of left-handed rotation decreases.

Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x Audio Power Amplifier