ZIQIAO Front Side View Re Camera HD 360° Rotation Night Vision Waterproof Car Rear View Camera

ZIQIAO Car Rear View Camera Parking Camera Acceories 360 Degrees Rotation Front Rear Left Right View HD Night Vision Waterproof

Features

The camera can be used as a rear view front view side view. The default is a front( image) camera without parking guide lines. There are and green wires leading on the power cable of the camera. Cut off the wire, turn on the parking guide wire; cut off the green wire to convert the image into a rearview image. Please refer to the following for the usage method.. If you need a front side view camera without guide ruler line, do not cut any cables.. If you need rear view camera without guide ruler line, cut off the green line.. If you need rear camera with guide ruler line, cut off the green and lines.

Specification

Signal mode: CVBSImage r: CMOSVideo format: NTSCAGC&BLC: AutomaticallyViewing angle: Diagonal 170 degrees, flat angle 140 degreexels: 728 x 512Clarity: 500 TVLineS/N ratio: Better than 48dbOperating voltage: DC 12VWaterproof level: 68Working temperature(Deg.C): -30 - +80

Package Listing

HSB0121 x Car rear view camera1 x 6m video cable1 x 1m power cable1 x User manual1 x 22.5mm HS0701 x Car rear view camera1 x 6m video cable1 x 1m power cable1 x User manual1 x 18.5mm hole 1 x key

Avoid Danger

Rear view camera is clearly visible day and night, allowing you to park safely.

The camera can be used as a rear view/ front view/ side view camera. The default is a front( image) camera without parking guide line. There are and green wires leading on the power cable of the camera. Cut off the wire, turn on the parking guide line; cut off the green wire to convert the image into a rearview image. Please refer to the following for the usage method.

. If you need a front/ side view camera without parking guide line, do not cut any wires.

. If you need a rear view camera without parking guide line, cut off the green wire.

. If you need a rear view camera with parking guide line, cut off the green and wires.

Rotate the key into the screw to adjust the tightne and find the right angle to tighten to prevent loosene.

Product

Product Size

Due to manual measurement, there may be an error of 1-2mm.

Installation Method

The installation instructions are for reference only. It is recommended that a profeional installer install the camera.1. Install the camera in the area of your car plate light.2. Adjust the of the camera to your best position.3. Connect the video output(yellow wire) to the monitor.4. Connect the power cable(red and black) to the power supply of the car's light, while , the monitoring system automatically start working, you can see the condition of the car tail clearly.

Common probl and solution

(1) Can this camera install a mirror on rearview?

No, it can't, it can usually connect a TFT monitor, a mirror monitor,A DVD, but it can't support any 5pin the driver's , for example, a mirror .

(2) Front side camera or rear view?

The camera can be rear view/ front view/ side view. Please buy it according to options.

(3) Why did the image shake, sp the screen, noise, unstable, blaand when you re?

1) The image becomes blaand just because you are buying the wrong TV system. This camera is built into the NTSC system by default, If your monitor is a PAL system, it will be shown by Jitter, Blaand .

Decision:

a. Please configure your TV system as automatic firstly when using it, then see if it can still install the system. Since the market has many monitors with 2 syst, it can install. But some old can not install. Therefore, please select the Right System to match the Cameras.

b. Please chethe correct cable connection setting.

c. If the above solutions still cannot deal, please contact your local car technician for help.

2) Image jitter, unstable startup screen, Voltage Below than we offer.

Decision: When the engine starts, the power supply on the wiring board of some German cars and American cars will output voltage ar g proceed by the car computer. The power supply of the lamp is not a pure DC power supply. Due to the backlight power supply has a voltage, the camera cannot work normally and the video signal output is not normal, so the host can see that there is serious interference, which can not switch the screen normally.we suest that you chethe voltage, Please add delay relays or power filters to the installation line.

(4) Our car has video and power cable, can you use it when I buy this camera?

Yes, it can, it supports theA plug. But we ase you not to use the cable yous, because the line may be and defined differently.

About Us

1. Our products must be strictly d before g sent, and the products can only be sent to customers ar they are proved to be intact.

2. You can mix all the it freely to p an order in our store.

About nsportation

1. If the customer's order is succefully p, we will choose a fast and reliable delivery method and send the package within 1-3 working days.

2. We are only responsible for shping to the ae filled in the order, please e sure that your shping ae is correct. We are not responsible for the incorrect or undeliverable ae.

3. If you have not received your goods within buyer protection period, please contact us. We will try our best to the shment and get bato you as soon as poible with a reply. Our goal is try our best to e customers satisfied!

4. duties,es and charges occurred in buyer's country are not included in the item price or shping charges. These charges are the buyer's responsibility.

Return &

1. If there is any probl with our products, you have 7 days to contact us and 15 days to return it from the date it was received. If this item is in your poeion more than 15 days, it is considered used and WE WILL NOT ISSUE YOU A OR REPMENT. There are NO EXCEPTIONS!

2. The buyer will be responsible for the to return the it.

Feedback

We are cotted to adhering to the highest standards in the industry and strive to e all customers satisfied! Your positive feedbais the best encouragement for us. If you are satisfied with our products and service, please give us 5-star and take tures to share in the feedbacolumn. If you are not satisfied with this purchase, please contact us.

Communication is the best way to soe the problem, rather than providing negative feedbaor initiating a public dispute. Please do believe that during the nsaction, no matter what happens, we will do our best to provide customers with quality service.