L 88SE9215 Ch 6 Ports 3.0 To E Expansion Card Express Adapter 3 Converter With Heat Sink For HDD

l 88SE9215 ch 6 ports 3.0 to e expansion Card expre Adapter 3 Converter with Heat Sink for HDD

About Descrtion:

Features: Compliant with Serial ATA 3.0 specification, backward compatible with 2.0 1.0 Compliant with -Expre v2.0 specification, backward compatible with -Expre v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Support 6 Support AHCI1.0 mode and IDE mode Support for native command queue (NCQ) Support FIS based on port multlier switch or command switching. Support hot swap and hot swap. Compatible with 6G, 3G and 1.5G hard drives Bus interface: -Expre x1 slot Expansion interface: 6 3.0 interfaces System Requirements: One Expre X1 slot is available, supporting both -E X2 X4 X8 X16 Operating system: Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux Product driver file: 1. CD: ... DRIVER\ CARD\l\91XX_92XX Setup, then select the appropriate folder according to the system. The E to 3.0 riser card is used as follows: First, the system disk and E to 3.0 riser card connection conditions and solutions: 1. The interface mode of E to 3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the . Otherwise, it will not pa. Our card riser card starts the system. 2. If it is determined that the interface installation system of the system disk inserted in the is AHCI mode, then you can directly insert the hard disk into our card, and then enter the BIOS to set the system disk as the first boot. 3, the above two conditions are available, if it still can not start, or repeated reboots, then the 's hard disk interface and our adapter card conflict, the solution is to enter the BIOS, set the 's hard disk interface options to Disabled, save and restart to start the system Second, the common disk and E to 3.0 connection conditions and solutions: 1. When the system disk is plugged into the , the ordinary disk is inserted in the E to 3.0 card, then only the adapter card information and the ordinary disk model need to be detected at startup. 2, if the condition is established, or can not start the system, then you must enter the BIOS, set the system disk to the first boot. Third, the system disk and the ordinary disk and E to 3.0 connection and solution: 1. Prerequisites, if the system disk with the installed system is AHCI mode test, can use the following methods to achieve, if it is IDE mode installed system, then you can only reinstall the system through E to 3.0 . 2, 1 condition is established, you can not start to enter the BIOS, set the system disk to the first boot. 3, 1.2 conditions are met, or can not start, then it may be integrated interface conflict, please enter the BIOS to set to Disabled

You'll receive:

1 x III (6Gbps) 6-port -Expre Controller Card

Please check tures for more details.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.